Thermodynamic modelling of the Ag-Cu-Ti ternary system
نویسندگان
چکیده
Ag-Cu-Ti system is important for brazing applications and mainly for ceramic joining. This system is characterized by numerous intermetallics in the Cu-Ti binary and the existence of a miscibility gap in the liquid phase. For applications, the knowledge of phase equilibria, invariant reactions in the temperature range of interest and thermodynamic activity values (mainly of Ti) are important. Thermodynamic model parameters for all the stable phases in the Ag-Cu, Cu-Ti and Ag-Ti systems, previously obtained using the Calphad method and available in the literature are used. New thermodynamic description for the ternary interaction parameter of the liquid is obtained from experimental informations. Ti2Cu and Ti2Ag which have the same crystallographic structure were modelled as a single phase. The same was done for TiCu and TiAg. Finally, solid solubility of Ag in the Ti-Cu intermetallics is taken into account. The parameters obtained in this assessment are later used for the calculation of selected sections that can be useful for research and applications in the field of joining with Ti activated Ag-Cu braze.
منابع مشابه
Thermodynamic and experimental study of Ti-Ag-Cu alloys
Phase equilibria in the ternary Ti-Ag-Cu system have been studied thermodynamically and experimentally at various temperatures. The thermodynamic analysis was performed by combining the most recent data on the binary Ag-Cu, Ti-Ag and Ti-Cu systems and experimental information obtained by the diffusion couple technique. The eutectic and three noneutectic binary Ag-Cu alloys were melted and annea...
متن کاملMean Activity Coefficients Measurements and Thermodynamic Modeling of the Ternary Mixed Electrolyte KCl + Lactose + Water System at T = 298.15 K
In this work, the mean activity coefficients of KCl in the KCl+lactose +water system were determined using the potentiometric method. The electromotive force measurements were carried out on the galvanic cell without liquid junction of the type: Ag|AgCl|KCl (m), lactose (wt.%), H2O (1−wt.) %|K-ISE, in various mixed solvent systems containing 0, 5,7.5, 10 and 12.5 % mass fractions of lactose. Th...
متن کاملSolubility Study in Ag-Cu Binary System Prepared By Ball Milling Process
Solid solutions of Ag-Cu were prepared via ball milling process, for about 5-30 h. The Cu-20at%Ag and Cu-3.64at%Ag composition were investigated by X-ray diffraction technique. It was realized that the solid solubility level could be increased by increasing the initial solute content in the mixture. In addition, shifts in peak positions of silver and copper were observed with milling time. The ...
متن کاملConstruction of Cu2+-selective electrode and thermodynamic study of the ternary aqueous mixed electrolyte system (CuCl2, KCl, H2O) using nanocomposite-based potentiometric sensor
A nanocomposite membrane Cu2+ ion-selective electrode has been constructed using a new compound ethyl 1,2,3,4-tetrahydro-4-(4-methoxyphenyl)-6-methyl-2-oxopyrimidine-5-carboxylat (ETMOC) as a neutral ionophore. The electrode works properly. It responds to Cu2+ ion with a sensitivity of 29.5 ± 0.2 mV/decade over the range 1.0 × 10−9 to 5.0 × 10−1M at p...
متن کاملConstruction of Cu2+-selective electrode and thermodynamic study of the ternary aqueous mixed electrolyte system (CuCl2, KCl, H2O) using nanocomposite-based potentiometric sensor
A nanocomposite membrane Cu2+ ion-selective electrode has been constructed using a new compound ethyl 1,2,3,4-tetrahydro-4-(4-methoxyphenyl)-6-methyl-2-oxopyrimidine-5-carboxylat (ETMOC) as a neutral ionophore. The electrode works properly. It responds to Cu2+ ion with a sensitivity of 29.5 ± 0.2 mV/decade over the range 1.0 × 10−9 to 5.0 × 10−1M at p...
متن کامل