Potentiostatic Electrochemical Preparation and Characterisation of Aluminium Containing Nickel Selenide
نویسندگان
چکیده
The wide range of properties exhibited by Al based alloy makes them suitable for different applications. Aluminium containing nickel Selenide ternary alloy possess considerable corrosion resistance as compared to their pure metal counterparts. The objective of the present work has been focused on the preparation and characterisation of its thin film. Alloying with Aluminium improve the oxidation resistance and increases the heat conductivity of the alloy. There is always a high demand for plating Al and its alloys in automotive and aerospace products, house-hold goods, and artificial jewellery etc,. The morphological and the structural studies of the electrodeposited thin film were determined by Scanning Electron Microscope (SEM) images and X-Ray Diffraction Pattern (XRD) while elemental composition has been done by Energy Dispersive X-Ray Spectroscopy (EDAX analysis).
منابع مشابه
An Electrochemical Investigation of Methanol Oxidation on Nickel Hydroxide Nanoparticles
In this work, a nickel-modified glassy carbon electrode (GCE) was prepared using a potentiostatic method in 0.1 M acetate buffer solution at pH 4.0 containing 1.0 mM nickel nitrate. Nickel hydroxide nanoparticles were prepared using consecutive potential scanning in 0.1 M NaOH solution. The as-prepared catalyst was characterized by field emission scanning electron microscopy and electrochemical...
متن کاملElectrochemical Characterization of Al2O3-Ni Thin Film Selective Surface on Aluminium
Solar thermal collectors represent a widely used type of system for the conversion of solar energy. In order to produce selective coatings on aluminium substrates to be used as absorber plates in high efficiency solar collectors, nickel pigmentation was applied to anodically oxidised surfaces. Electrochemical dc methods are used to study the oxidation of aluminium as functions of the following ...
متن کاملPreparation of Lanthanum–Nickel–Aluminium Perovskite Systems and their Application in Methane-Reforming Reactions
In this study we developed LaNixAl1-xO3 perovskite systems using a sol-gelmethod (with propionic acid as solvent) to use in methane-reforming reactions for producing synthesis gas. To understand the roles of the nature of the precursor and calcination conditions on the formation of LaNixAl1-xO3, we carried out identifications using NMR, FT-IR, XRD, SEM, and TEM. The precursor struc...
متن کاملCobalt and Nickel Nanopillars on Aluminium Substrates by Direct Current Electrodeposition Process
A fast and cost-effective technique is applied for fabricating cobalt and nickel nanopillars on aluminium substrates. By applying an electrochemical process, the aluminium oxide barrier layer is removed from the pore bottom tips of nanoporous anodic alumina templates. So, cobalt and nickel nanopillars are fabricated into these templates by DC electrodeposition. The resulting nanostructure remai...
متن کاملFacile preparation of a novel nickel-containing metallopolymer via RAFT polymerization
While the metallocene polymers were comprehensively studied, other metallopolymers are rarely explored. The major challenge is the lack of a synthetic platform for the preparation of metal coordinated derivatives, monomers, and polymers. Therefore, the development of a facile synthesis of new metal coordinated monomers and polymers is critically needed. A novel successfully synthesized methacry...
متن کامل