Analysis and Simulation of Two { Dimensional Dopant Diffusion in Silicon Wilhelm
نویسندگان
چکیده
The production of modern microchips requires a large number of fabrication steps. One important step is the creation of semiconducting areas, where charged dopants are implanted into a semiconducting material and under the in uence of high temperatures the dopants penetrate into the layer. This redistribution of dopants and point defects can be described in terms of pair di usion mechanisms. The resulting reaction{drift{di usion equations include systems of nonlinear parabolic, ordinary and elliptic di erential equations. We state a new existence result of strong solutions in Sobolev spaces. Moreover we present an adaptive algorithm for the numerical simulation of the doping process which is based on an error controlled mesh design in the course of time integration. The adaptation of the mesh is automatically done up to a prescribed tolerance.
منابع مشابه
Implementation of EIS for dopant profile analysis in n-type silicon
An experimental setup has been developed for successive photo-electrochemical etch and EIS measurement of semiconductor samples. Furthermore an algorithm based on electrochemical capacitance-voltage (ECV) has been developed for calculating dopant profile based on the measurements by developed setup. Phosphorous diffusion profile in p-type silicon was estimated by employing developed setup and a...
متن کاملThree-Dimensional Numerical Simulation for Low Dopant Diffusion in Silicon
A numerical simulator for the calculation of redistribution of low dopant diffusion in silicon has been developed in threedimensional(3D) geometry. The diffusion behavior of boron is investigated by using three mask structures and changing the contact hole sizes. The results of calculations show that 3D diffusion effects will be very important in the development of submicron process and small d...
متن کاملA Two - Dimensional Dopant Diffusion Model for Polysilicon
We present a two-dimensional simulation model for dopant diffusion in polysilicon, which includes dopant clustering in grain interiors as well as in grain boundaries. The grain growth model is coupled with the diffusion coefficient of the dopants and the process temperature. For all high dose implantation cases the trapping/emission mechanism in polysilicon and the grain growth are the major ef...
متن کاملTwo Dimensions for IC Process Simulation
During simulation of silicidation and oxidation, some Another solution for handling the moving boundaries is to layers are consumed (poly, silicon) and other layers grow (oxide, silicide). During these growth processes, grid must be added behind the advancing interface and removed in front of it. In a full integrated circuit process simulator, this has to be performed simultaneously with the tr...
متن کاملSimulation of Boron Diffusion in Strained Sil-,Ge, Epitaxial Layers
This paper describes a simple and accurate model for boron diffusion in SiGe that was successfully implemented in TAURUS (PMEI). The comparison of the Si,.,Ge, samples to the Si samples after rapid thermal and furnace annealing revealed a retarded B diffusion inside the strained Sil.,Ge, layers. The influence of the Ge content on the dopant diffusion was also measured and simulated, demonstrati...
متن کامل