Study on the Correlation between Humidity and Material Strains in Separable Micro Humidity Sensor Design
نویسنده
چکیده
Incidents of injuries caused by tiles falling from building exterior walls are frequently reported in Taiwan. Humidity is an influential factor in tile deterioration but it is more difficult to measure the humidity inside a building structure than the humidity in an indoor environment. Therefore, a separable microsensor was developed in this study to measure the humidity of the cement mortar layer with a thickness of 1.5-2 cm inside the external wall of a building. 3D printing technology is used to produce an encapsulation box that can protect the sensor from damage caused by the concrete and cement mortar. The sensor is proven in this study to be capable of measuring temperature and humidity simultaneously and the measurement results are then used to analyze the influence of humidity on external wall tile deterioration.
منابع مشابه
MEMS Capacitive Relative Humidity Sensor Design, Fabrication, and Characterization
The motivating principle behind this research is the development of a small, wearable sensor that would use humidity and temperature measurements as metrics for health monitoring. We have successfully fabricated macro-scale devices via pressing of a polymer between two aluminum plates, and the responses of these capacitors were tested in various humidity conditions. The transition from macro to...
متن کاملAnalysis of temporal and spatial correlation between precipitable water vapor retrievals from AIRS satellite sensor and 29 synoptic station measurements in Iran
Precipitable Water Vapor (PWV) is one of the most important quantities in meteorology and climate studies. PWV in Earth's atmosphere can be measured by Sun-photometer, the Atmospheric Infrared Sounder (AIRS), and radiosonde from surface, atmosphere and space-based systems, respectively. In this paper, we use PWV measured by Sun-photometer located in Institute for Advanced Studies in Basic Scien...
متن کاملMonitoring of dust phenomenon and Investigate its correlation with temperature and humidity parameters (Case study: Khuzestan Province)
Dust is a phenomenon in arid and semi-arid areas due to high wind speeds on the un-polluted soil surface and prone to erosion. The occurrence of dust has always been a problem for residents in the western and southwestern regions of the country, has gradually spread to other provinces, including the capital. The study area is southwest of Iran, Khuzestan province. The latitude and longitude of ...
متن کاملThe study of humidity effect on carbon dioxide gas sensing properties of zinc oxide nanowires assisted by polyvinyl alcohol network at room temperature
In this research, Zinc oxide (ZnO) nanostructures were synthesized by low cost hydrothermal method. The grown ZnO nanostructures had a dispersed distribution with nanowire morphology and the specific surface area of about 7 m2.gr-1 which they have crystalized in hexagonal wurtzite structure. ZnO nanowires/polyvinyl alcohol network (ZP) on the epoxy glass substrate with cu-interdigited electrods...
متن کاملStudy on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel
> Copper-silica aerogel was synthesized by the sol-gel method and was heated at 400, 500 and 600°C for 3 h in the air. The gained materials were named as sample (a), (b) <span style="font-size: 9pt; colo...
متن کامل