Moisture content determination by DXA Improved method based on dual-energy X-ray absorptiometry (DXA) for nondestructive evaluation of solid wood moisture content

An accurate, rapid, and convenient method is presented for moisture content (MC) 10 determination of solid wood based on dual-energy X-ray absorptiometry (DXA). Poly(methyl methacrylate)-equivalent thicknesses (PMMA-EThs) of sugi (Cryptomeria japonica D. Don) wood blocks and pure water were measured by means of a wide range of X-ray tube voltages (20–100 kV). The ratio of the PMMA-ETh of pure water to that of wood decreased as X-ray tube voltage was increased, suggesting that an appropriate pair of tube voltages for DXA is 20 15 kV and 100 kV. According to this result, X-ray images of thirty wood samples were taken at 20 kV and 100 kV tube voltages, and their average PMMA-Eths from both images was determined. There was a strong negative correlation between the wet-basis MC of the wood sample and the ratio of its PMMA-Eth at 100 kV to that at 20 kV. A regression equation was developed for estimating the dry-basis MC of wood samples from their PMMA-ETh ratios. 20 The standard error of estimate was 2.2%, which is better than those determined for electric moisture meters. This approach may lead to the development of a practical, nondestructive moisture meter for wood.