Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals
نویسندگان
چکیده
Cellulose nanocrystals (CNCs) are reinforcing fillers of emerging interest for polymers due to their high modulus and potential for sustainable production. In this study, CNC-based composites with a waterborne epoxy resin matrix were prepared and characterized to determine morphology, water content, and thermal and mechanical properties. While some CNC aggregation was observed, the glass transition temperature (Tg) and modulus for the composites increased with increasing CNC content. Relative to neat epoxy, at 15 wt.% CNC the storage modulus increased by 100%, the Tg increased from 66.5 C to 75.5 C, and tensile strength increased from 40 MPa to 60 MPa, suggesting good adhesion between epoxy and CNC surfaces exposed to the matrix. Additionally, no additional water content resulting from CNC addition were observed. These results provide evidence that CNCs can improve thermomechanical performance of waterborne epoxy polymers and that they are promising as reinforcing fillers in structural materials and coatings. 2013 Elsevier Ltd. All rights reserved.
منابع مشابه
Thermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method
متن کامل
Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...
متن کاملCharacterization of Epoxy Composites Reinforced with Wax Encapsulated Microcrystalline Cellulose
The effect of paraffin wax encapsulated microcrystalline cellulose (EMC) particles on the mechanical and physical properties of EMC/epoxy composites were investigated. It was demonstrated that the compatibility between cellulose and epoxy resin could be maintained due to partial encapsulation resulting in an improvement in epoxy composite mechanical properties. This work was unique because it w...
متن کاملEnvironmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging
The aim of this study is to investigate effects of isothermal aging on mechanical properties of fiber metal laminates (FMLs) and glass/epoxy composites. For this purpose, both materials were fabricated using the wet lay-up manufacturing technique under vacuum pressure. Both the glass/epoxy composites and the FML specimens were then subjected to isothermal aging (130°C, dried air) for up to 5 we...
متن کاملAssessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis
The effect of alumina and tough nylon 66 on microparticles’ presence the mechanical and thermal properties of epoxy adhesives is assessed here. In order to distribute the adhesive formulation components, in a uniform manner a mechanical stirrer is applied. The effect a combined percentage of nylon66 at (20،30،40 pph) and alumina micro-particles 20 μ (50,60,70 pph) selected based on Taguchi expe...
متن کامل