Catalytic converters for exhaust emission control of commercial equipment powered by internal combustion engines.

نویسنده

  • J G Cohn
چکیده

The development of PTX, monolithic catalytic exhaust purifiers, is outlined, and their first use for exhaust emissions control of commercial equipment is described. The main use of PTX converters is on forklift trucks. The purification achievable with PTX-equipped fork-lift trucks under various operational conditions is discussed, and examples from the field are given. During more than ten years of operation, no adverse health effects have been reported, and PTX-equipped internal combustion engines appear safe for use in confined areas.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Research needs for future internal combustion engines

Transportation is second only to industrial use as the largest consumer of energy in the US and accounts for about 60% of our nation’s use of petroleum—an amount equivalent to all of the oil the country imports. The numbers are staggering: Some 10 000 gallons of petroleum are burned in the US each second of every day. Although new energy sources are being developed and renewable fuels are emerg...

متن کامل

Monolithic Three-way Palladium Catalytic Converters for Automobile Exhaust Emission Control

This article presents the research results on production and performance of palladium-only catalytic converters. Monolith is used as the catalyst carrier and gamma alumina as the substrate. Dipping method is used for monolith washcoating. Palladium as the active metal is impregnated on gamma alumina using wet impregnation to produce catalyst samples. The effects of factors such as percent solid...

متن کامل

Numerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics

Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...

متن کامل

A Modelling Approach to the Design Optimization of Catalytic

In this paper, a modelling approach to the design optimization of catalytic converters is presented. The first step of the optimization is the model-assisted sizing of catalysts. For a given inlet exhaust condition, a semi-empirical, experimentally calibrated, 0-D steady state catalyst model is employed to sort through a data base of catalysts under given restraints, yielding few successful can...

متن کامل

Prediction of Major Pollutants Emission in Direct-Injection Dual-Fuel Diesel And Natural-Gas Engines

The dual-fuel diesel engine (D.F.D.E) is a conventional diesel engine in which much of the energy released, hence power, comes from the combustion of gaseous fuel such as natural gas. The exhaust emission characteristics of the D.F.D.E needs further refinements, particularly in terms of reduction of Unburnt Hydrocarbons (U7HC) and Carbon Monoxide (CO) emission, because the concentration of thes...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Environmental Health Perspectives

دوره 10  شماره 

صفحات  -

تاریخ انتشار 1975