Dynamic Load Carrying Capacity of Spatial Cable Suspended Robot: Sliding Mode Control Approach
نویسندگان
چکیده
Abstract: This paper proposes a control strategy for a cable-suspended robot based on sliding mode approach (SMC) which is faced to external disturbances and parametric uncertainties. This control algorithm is based on Lyapunov technique which is able to provide the stability of the end-effecter during tracking a desired path with an acceptable precision. The main contribution of the paper is to calculate the Dynamic Load Carrying Capacity (DLCC) of a spatial cable robot while tracking a desired trajectory based on SMC algorithm. In finale, the efficiency of the proposed method is illustrated by performing some simulation studies on the ICaSbot (IUST Cable Suspended Robot) which supports 6 DOFs using six cables. Simulation and experimental results confirm the validity of the authors’ claim corresponding to the accurate tracking capability of the proposed control, its robustness and its capability toward DLCC calculation.
منابع مشابه
Optimal Path Planning of Spatial Cable Robot Using Optimal Sliding Mode Control
This paper proposes a control strategy for a cable‐suspended robot based on an optimal sliding mode approach confronted by external disturbances and parametric uncertainties. This control algorithm is based on the Lyapunov technique, which is not only able to provide the stability of the end‐effector with an acceptable precision but also provides the optimal path in...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کاملDynamic Load Carrying Capacity of Mobile-Base Flexible-Link Manipulators: Feedback Linearization Control Approach
This paper focuses on the effects of closed- control on the calculation of the dynamic load carrying capacity (DLCC) for mobile-base flexible-link manipulators. In previously proposed methods in the literature of DLCC calculation in flexible robots, an open-loop control scheme is assumed, whereas in reality, robot control is achieved via closed loop approaches which could render the calculated ...
متن کاملModeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling
Modeling and Wrench feasible workspace analysis of a spatial cable suspended robots is presented. A six-cable spatial cable robot is used the same as Stewart robots. Due to slow motion of the robot we suppose the motion as pseudostatic and kinetostatic modeling is performed. Various workspaces are defined and the results of simulation are presented on the basis of various workspaces and app...
متن کاملAdaptive Sliding Mode Tracking Control of Mobile Robot in Dynamic Environment Using Artificial Potential Fields
Solution to the safe and collision-free trajectory of the wheeled mobile robot in cluttered environments containing the static and/or dynamic obstacle has become a very popular and challenging research topic in the last decade. Notwithstanding of the amount of publications dealing with the different aspects of this field, the ongoing efforts to address the more effective and creative methods is...
متن کامل