Design and Analysis of Decoupled Parallel Mechanism with Redundant Actuator
نویسندگان
چکیده
Ai = Prismatic joints along the horizontal circular guide Bi = Spherical joints on the moving platform Ci = Prismatic joints on the vertical columns (i = 1,2,3) {F} = Fixed global reference frame {M} = Moving frame α, β, γ = ZYX Euler angles of rotation about the three joint axes of rider. α', β', γ', δ' = ZYXZ’ Euler angles of rotation about the four joint axes of chair on the moving platform of the Eclipse-II one-man ride machine. α'', β'', δ'' = ZYX Euler angles of rotation about the three joint axes of chair on the moving platform of the modified Eclipse-II one-man ride machine. Rcommand, Rcontrol, Rmodified_control = Rotation matrices
منابع مشابه
Interval Analysis of Controllable Workspace for Cable Robots
Workspace analysis is one of the most important issues in the robotic parallel manipulator design. However, the unidirectional constraint imposed by cables causes this analysis more challenging in the cabledriven redundant parallel manipulators. Controllable workspace is one of the general workspace in the cabledriven redundant parallel manipulators due to the dependency on geometry parameter...
متن کاملMotion Planning for Redundant Parallel Kinematic Mechanism Using Joint Torque Distribution
This paper presents the motion planning for the redundant parallel kinematic mechanism using joint torque distribution that satisfies a path of the end-effector. The redundant parallel kinematic mechanism more numbers of actuator than numbers of degrees-of-freedom, and it has the advantage of bigger workspace than non-redundant parallel kinematic mechanism by eliminating singularities. The redu...
متن کاملRobust Control of a High Redundancy Actuator
The High Redundancy Actuator project deals with the construction of an actuator using many redundant actuation elements. Whilst this promises a high degree of fault tolerance, the high number of components poses a unique challenge from a control perspective. This paper shows how a simple robust controller can be used to control the system both in nominal state and after faults. To simplify the ...
متن کاملKinematic Analysis of A 3-DOF Parallel Mechanism for Milling Applications
Parallel mechanisms have been studied during the last two decades, due to the fact that they present some potential advantages in a comparison with serial structures. This work presents the kinematic analysis of a novel 3-dof asymmetric parallel mechanism, purposely conceived for milling applications. In a comparison with the previous proposed concepts, this type of kinematic structure shows so...
متن کاملDesign and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کامل