Phase Dynamics and Kinetics of Thin Lubricant Film Driven by Correlated Temperature Fluctuations
نویسندگان
چکیده
The melting of an ultrathin lubricant film is studied at friction between atomically flat surfaces. We take into account fluctuations of lubricant temperature, which are defined by the Ornstein-Uhlenbeck process. Phase diagrams and portraits are calculated for secondand first-order transitions (the melting of an amorphous and that of a crystalline lubricants, respectively). It is shown that, in the former case, a stick-slip friction domain, separating the regions of dry and sliding friction, appears. In the latter case, three domains of stick-slip friction arise, which are characterized by the transitions between dry, metastable and stable sliding friction. The increase in the correlation time of lubricant temperature fluctuations leads to increasing in the rubbing-surface temperature needed for realization of sliding friction. The stationary states, corresponding to dry, stable and metastable sliding friction, are reached as a result of damped oscillations.
منابع مشابه
Influence of Temperature Correlations on Phase Kinetics of Boundary Friction
Using the Lorenz model for viscoelastic medium approximation the melting of ultrathin lubricant film is studied by friction between atomically flat surfaces. The fluctuations of lubricant temperature are taken into account defined by Ornstein-Uhlenbeck process. The phase portraits are defined corresponding to the different regions of dynamic phase diagram and determining system’s kinetics. It i...
متن کاملInfluence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique
In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملAnnealing temperature effect on nanostructure and phase transition of Copper Oxide thin films
This paper addresses the annealing temperature effect on nanostructure and phase transition of copper oxide thin films, deposited by PVD method on glass substrate (at 110 nm thickness) and post annealed at different temperatures (200-400°C) with a flow of 1 cm3s-1 Oxygen. The X-ray diffraction (XRD) was employed for crystallographic and phase analyses, while atomic force m...
متن کاملMolecular Dynamics Simulation of Al Energetic Nano Cluster Impact (ECI) onto the Surface
On the atomic scale, Molecular Dynamic (MD) Simulation of Nano Al cluster impact on Al (100) substrate surface has been carried out for energies of 1-20 eV/atom to understand quantitatively the interaction mechanisms between the cluster atoms and the substrate atoms. The many body Embedded Atom Method (EAM) was used in this simulation. We investigated the maximum substrate temperature Tmax and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007