Parametrically Excited Vibration in Rolling Element Bearings
نویسندگان
چکیده
A defect-free rolling element bearing has a varying stiffness. The variation of stiffness depends on number of rolling elements, their configuration and cage frequency. The time-varying characteristics of the stiffness results in a parametric excitation. This may lead to instability which is manifested as high vibration levels. An FEM simulation is performed to evaluate stiffness in each configuration of rolling elements and is used to study the variation of direct stiffness and cross coupled stiffness. The obtained stiffness variation is expanded into a Fourier series to form the equation of motion for the bearing vibration. As the stiffness varies with cage frequency, stiffness term in the equation of motion is periodic with parametric excitation. Hence, the equation of motion is a 2-DOF coupled Mathieu equation. Based on Mathieu parameters and cage frequency there exists unstable rpm ranges for a particular bearing. Floquet theory is employed to find out the stable and unstable regions. This involves finding out maximum Floquet exponent using Monodromy matrix. The results obtained through Floquet theory are in agreement with the numerical solution of the governing equations.
منابع مشابه
Rolling Element Bearing Vibration – Generation and Significance
Rolling bearings are one of the most important noise and vibration generator into mechanical constructions. Therefore, it is very important to have knowledge of the rolling element bearings influence on the level of noise and vibration in this systems. This paper deals with a basic forms for generation of vibration and noise of rolling element bearing and suggestions of vibration analysis signi...
متن کاملAn efficient analytical solution for nonlinear vibrations of a parametrically excited beam
An efficient and accurate analytical solution is provided using the homotopy-Pade technique for the nonlinear vibration of parametrically excited cantilever beams. The model is based on the Euler-Bernoulli assumption and includes third order nonlinear terms arisen from the inertial and curvature nonlinearities. The Galerkin’s method is used to convert the equation of motion to a nonlinear ordin...
متن کاملBearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm
Rotating machinery is the most common machinery in industry. The root of the faults in rotating machinery is often faulty rolling element bearings. This paper presents a technique using optimized artificial neural network by the Bees Algorithm for automated diagnosis of localized faults in rolling element bearings. The inputs of this technique are a number of features (maximum likelihood estima...
متن کاملVibration Transmission through Self-aligning (spherical) Rolling Element Bearings: Theory and Experiment
Interest in vibration control in systems employing rolling element bearings, ranging from rotor systems used in energy conversion/transmission to high-precision, multi-degree-offreedom optical positioning systems, has focused attention on the modelling of bearing dynamic stiffness properties. While modelling a rolling element bearing either as an ideal boundary condition for a shaft or as a sim...
متن کاملApplication of Artificial Neural Network in the Investigation of Bearing Defects
Maintenance and design engineers have great concern for the functioning of rotating machineries due to the vibration phenomenon. Improper functioning in rotating machinery originates from the damage to rolling element bearings. The status of rolling element bearings require advanced technologies to monitor their health status efficiently and effectively. Avoiding vibration during machine runnin...
متن کامل