Definitions and Managed Objects for Operations, Administration, and Maintenance (OAM) Functions on Ethernet-Like Interfaces
نویسنده
چکیده
This document defines objects for managing Operations, Administration, and Maintenance (OAM) capabilities on Ethernet-like interfaces conformant to the Ethernet OAM functionality defined in the Ethernet in the First Mile (EFM) clauses of the Ethernet standards. The Ethernet OAM functionality is complementary to the Simple Network Management Protocol (SNMP) in that it is focused on a small set of link-specific functions for directly connected Ethernet interfaces. This document defines objects for controlling those link OAM functions and for providing results and status of the OAM functions to management entities. Squire Standards Track [Page 1] RFC 4878 OAM Functions on Ethernet-Like Interfaces June 2007
منابع مشابه
Ethernet OAM Overview: Making Ethernet Manageable
This paper provides an overview of three important tools for Ethernet Operations, Administration, and Maintenance (OAM): Link-layer Ethernet OAM, Ethernet-Local Management Interface (E-LMI), and Service Layer Ethernet OAM – commonly referred to as “Connectivity Fault Management”.
متن کاملDefinitions of Managed Objects for the Ethernet-Like Interface Types
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. This memo obsoletes RFC 1650 "Definitions of Managed Objects for the Ethernet-like Interface Types using SMIv2". This memo extends that specification by including management information useful for the management of 100 Mb/s Ethernet interfaces. Ethernet techn...
متن کاملRFC 7369 GMPLS - Based Ethernet OAM
The work related to GMPLS Ethernet Label Switching (GELS) extended GMPLS RSVP-TE to support the establishment of Ethernet Label Switching Paths (LSPs). IEEE Ethernet Connectivity Fault Management (CFM) specifies an adjunct Operations, Administration, and Maintenance (OAM) flow to check connectivity in Ethernet networks. CFM can also be used with Ethernet LSPs for fault detection and triggering ...
متن کاملTask Force ( IETF ) A . Takacs
The work related to GMPLS Ethernet Label Switching (GELS) extended GMPLS RSVP-TE to support the establishment of Ethernet Label Switching Paths (LSPs). IEEE Ethernet Connectivity Fault Management (CFM) specifies an adjunct Operations, Administration, and Maintenance (OAM) flow to check connectivity in Ethernet networks. CFM can also be used with Ethernet LSPs for fault detection and triggering ...
متن کاملRfc 6669 Oam
This document provides an overview of the Operations, Administration, and Maintenance (OAM) toolset for MPLS-based transport networks. The toolset consists of a comprehensive set of fault management and performance monitoring capabilities (operating in the data plane) that are appropriate for transport networks as required in RFC 5860 and support the network and services at different nested lev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- RFC
دوره 4878 شماره
صفحات -
تاریخ انتشار 2007