Thermal Conductivity of a Zirconia Thermal Barrier Coating
نویسنده
چکیده
The conductivity of a thermal-barrier coating composed of atmospheric plasma sprayed 8 mass percent yttria partially stabilized zirconia has been measured. This coating was sprayed on a substrate of 410 stainless steel. An absolute, steady-state measurement method was used to measure thermal conductivity from 400 to 800 K. The thermal conductivity of the coating is 0.62 W/(m⋅K). This measurement has shown to be temperature independent.
منابع مشابه
Effect of high-temperature aging on the thermal conductivity of nanocrystalline tetragonal yttria-stabilized zirconia
The thermal conductivity of yttria-stabilized zirconia (YSZ) thermal barrier coatings increases with high-temperature aging. This common observation has been attributed to the densification of the coatings as porosity sinters out and pores and cracks spheroidize to minimize their surface energy. We show that the thermal conductivity of fully-dense 3 mol.% Y2O3 stabilized zirconia (3YSZ) also in...
متن کاملEvaluation of Thermal Barrier Coating in Low Cycle Fatigue Life for Exhaust Manifold
This paper presents low cycle fatigue (LCF) life prediction of a coated and uncoated exhaust manifolds. First Solidworks software was used to model the exhaust manifolds. A thermal barrier coating system was applied on the tubes c of the exhaust manifolds, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat ...
متن کاملThermal Conductivity Measurement of an Electron-Beam Physical-Vapor-Deposition Coating
An industrial ceramic thermal-barrier coating designated PWA 266, processed by electron-beam physical-vapor deposition, was measured using a steady-state thermal conductivity technique. The thermal conductivity of the mass fraction 7 % yttria-stabilized zirconia coating was measured from 100 °C to 900 °C. Measurements on three thicknesses of coatings, 170 μm, 350 μm, and 510 μm resulted in ther...
متن کاملThermal barrier coating effect on stress and temperature distribution of diesel engines cylinder heads using a two-layer viscoelasticity model with considering viscosity effects
This paper presents finite element analysis (FEA) of a coated and uncoated cylinder heads of a diesel engine to examine the distribution of temperature and stress. A thermal barrier coating system was applied on the combustion chamber of the cylinder heads, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat...
متن کاملThermophysical properties of thermal barrier coatings
Thin layers of thermal barrier coating (TBCs) are applied to metallic components of heat engines to reduce metal temperatures and to provide environmental protection. This results in increased engine efficiency and prolonged operational life. Of special current interest is the use of TBCs in aircraft engines. The TBCs, often yttria-stabilized zirconia (YSZ), are deposited on nickel or cobalt-ba...
متن کامل