Development of nano-grained Calcium Hy-droxyapatite using slip casting technique
نویسندگان
چکیده
The purpose of this study is to synthesize nano-grained Calcium Hydroxyapatite (HAp) through slip casting technique. For this, hydroxyapatite powders were synthesized using two methods, wet chemical method and Ammoniacal method. The as-prepared powders and calcined powders were characterized using XRD, FTIR, to study the phases of the powders. The hydroxyapatite powder calcined at 1000°C for 2hr was used to prepare 50 vol% slurry using DN40 (sodium polyacrylate) as dispersing agent. After slip casting, the green bodies were sintered at different temperatures, 1100, 1200, 1250 and 1300°C with 2hr soaking time. The sintered dense samples were characterized for physical, mechanical and biological behavior.
منابع مشابه
The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering
In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...
متن کاملPreparation and Evaluation of Porous ƒÀ - TCP Based Composites
The scaffolds composed of monolithic ƒÀ-TCP and ƒÀ-TCP/ƒ¿-TCP composites were fabricated by a low-loaded environmental processing. The pore introduction was attempted using starch, instead of polymer beads. The aqueous slurry of the mixture of ƒÀ-TCP and starch was prepared for an aqueous slip-casting. Problem on the heterogeneity distribution of the starch in aqueous slip-casting was solved by...
متن کاملEvolution of texture in an ultrafine and nano grained magnesium alloy
The evolution of texture was discussed during the formation of ultra-fine and nano grains in a magnesium alloy severely deformed through accumulative back extrusion (ABE). The microstructure and texture obtained after applying multiple deformation passes at temperatures of 100 and 250°C were characterized. The results showed that after single ABE pass at 100°C an ultrafine/nano grained microstr...
متن کاملStudy of multilayer and multi-component coatings deposited using cathodic Arc technique on H-13 hot work steel for die-casting applications
Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...
متن کامل1 Microstructure , texture and tensile properties of ultrafine / nano grained 1 magnesium alloy processed by accumulative back extrusion
Microstructure, texture and tensile properties of ultrafine/nano grained 1 magnesium alloy processed by accumulative back extrusion 2 3 S.M. Fatemi, A. Zarei-Hanzaki, J.M. Cabrera 4 5 a School of Mechanical Engineering, Shahid Rajaee Teacher Training University, 136-16785, Tehran, Iran 6 b Department of Metallurgical & Materials Engineering, University of Tehran, 515-14395, Tehran, Iran 7 c Dep...
متن کامل