Automatic Modeling of Fault Tree for NuIEEE Transactions on Power Electronics,Clear Power Safety I&C Configuration
نویسندگان
چکیده
The automatic modeling of fault tree for nuclear power safety I&C configuration is designed to meet the requirements of reducing the workload and improving the traceability during the nuclear power safety I&C system reliability assessment work. To complete the fault tree automatic modeling, the Visio Automation software technology is used to analyze the topology of the nuclear power safety I&C system hardware device and software function. The good result in practical implementations shows that the nuclear power safety I&C system fault tree modeling work is successfully simplified.
منابع مشابه
Bayes Networks and Fault Tree Analysis Application in Reliability Estimation (Case Study: Automatic Water Sprinkler System)
In this study, the application of Bayes networks and fault tree analysis in reliability estimation have been investigated. Fault tree analysis is one of the most widely used methods for estimating reliability. In recent years, a method called "Bayes Network" has been used, which is a dynamic method, and information about the probable failure of the system components will be updated according to...
متن کاملFault-tree modeling for the signal generation failures of the engineered safety features in digitalized nuclear power plant
A safety assessment for the engineered safety feature actuation system designed in the Korean Nuclear I&C System (KNICS) project by using newly developed safety-critical-class microprocessor-based modules was performed. Fault-tree models were developed to assess the failure probability of a system function which is to generate an automated actuation signal for accident-mitigation equipment. The...
متن کاملModel-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines
In this paper, the multi-sensor fault diagnosis in the exhaust temperature sensors of a V94.2 heavy duty gas turbine is presented. A Laguerre network-based fuzzy modeling approach is presented to predict the output temperature of the gas turbine for sensor fault diagnosis. Due to the nonlinear dynamics of the gas turbine, in these models the Laguerre filter parts are related to the linear d...
متن کاملA New Power Management Approach for PV-Wind-Fuel Cell Hybrid System in Hybrid AC-DC Microgrid Configuration
The hybrid AC-DC microgrid (HMG) architecture has the merits of both DC and AC coupled structures. Microgrids are subject to intermittence when the renewable sources are used. In the HMG, since power fluctuations occur on both subgrids due to varying load and unpredictable power generation from renewable sources, proper voltage and frequency regulation is the critical issue. This article propos...
متن کاملError assessment in man-machine systems using the CREAM method and human-in-the-loop fault tree analysis
Background and Objectives: Despite contribution to catastrophic accidents, human errors have been generally ignored in the design of human-machine (HM) systems and the determination of the level of automation (LOA). This paper aims to develop a method to estimate the level of automation in the early stage of the design phase considering both human and machine performance. Methods: A quantita...
متن کامل