Investigations into packaging technology for membrane-based thermal flow sensors
نویسنده
چکیده
A new packaging method to mount a membrane-based thermal flow sensor, flush with the surface, is presented. Therefore, a specific design for the housing is shown, which is also adaptable to other conditions. It has been experimentally shown that it is important to mount the sensor flush with the surface. In addition, the experimental results are discussed. If a membrane-based thermal flow sensor is not mounted flush with the surface, vortices can occur (depending on velocity and fluid properties) or the reduction in the channel cross section plus a decrease in sensitivity have to be taken into account.
منابع مشابه
Thermal Flow Sensors for Harsh Environments
Flow sensing in hostile environments is of increasing interest for applications in the automotive, aerospace, and chemical and resource industries. There are thermal and non-thermal approaches for high-temperature flow measurement. Compared to their non-thermal counterparts, thermal flow sensors have recently attracted a great deal of interest due to the ease of fabrication, lack of moving part...
متن کاملThe Effect of Microwave on Migration of Styrene Monomer Polystyrene Food Packaging and Compared to other Thermal Processes
The migration of packaging material constituents into food is a product of the interaction between the food and packaging material. This phenomenon is of importance because some migrating substances may be toxicologically carcinogenic and endanger the consumer safety. Polystyrenes are used in many food-contact applications for the packaging of aqueous-based, fatty and dry foods. The correlation...
متن کاملFabrication and Performance of MEMS-Based Pressure Sensor Packages Using Patterned Ultra-Thick Photoresists
A novel plastic packaging of a piezoresistive pressure sensor using a patterned ultra-thick photoresist is experimentally and theoretically investigated. Two pressure sensor packages of the sacrifice-replacement and dam-ring type were used in this study. The characteristics of the packaged pressure sensors were investigated by using a finite-element (FE) model and experimental measurements. The...
متن کاملNoise Equivalent Power Optimization of Graphene- Superconductor Optical Sensors in the Current Bias Mode
In this paper, the noise equivalent power (NEP) of an optical sensor based ongraphene-superconductor junctions in the constant current mode of operation has beencalculated. Furthermore, the necessary investigations to optimize the device noise withrespect to various parameters such as the operating temperature, magnetic field, deviceresistance, voltage and current bias have been presented. By s...
متن کاملModeling of the Response Time of Thermal Flow Sensors
This paper introduces a simple theoretical model for the response time of thermal flow sensors. Response time is defined here as the time needed by the sensor output signal to reach 63.2% of amplitude due to a change of fluid flow. This model uses the finite-difference method to solve the heat transfer equations, taking into consideration the transient conduction and convection between the sens...
متن کامل