Light modulation with electro-optic polymer-based resonant grating waveguide structures.
نویسندگان
چکیده
A novel modulator design incorporating an E-O polymer into a resonant grating waveguide structure is presented. Using purely polymeric material we developed a resonant grating waveguide structure having low loss and high finesse, with approximately 2nm spectral line width at 1.55 mum. An externally applied voltage modulates the refractive index of the E-O waveguide, thereby shifting the resonance wavelength and modulating the incident light at MHz rates. Such modulator operates in free space and does not involve waveguide patterning nor the need for facet conditioning and coupling common to operation in the Mach-Zehnder type configuration.
منابع مشابه
A Compact Hybrid Silicon/Electro-Optic Polymer Resonant Cavity Modulator Design
The design and simulation of a novel resonant cavity optical modulator incorporating a hybrid silicon/electro-optic polymer slot waveguide structure is presented in this work. The device utilizes the electro-optic polymer in the cavity region to provide an active material for modulation and includes distributed Bragg reflectors in single mode silicon waveguide regions at each end of the cavity ...
متن کاملDesign of Ultra Fast Polymer Electro-Optic waveguide Switch for Intelligent Optical Networks
Traditional optical networks are gradually evolving towards intelligent optical networks due to the need for faster bandwidth provisioning, protection and restoration of the network that can be accomplished with devices like optical switch, add drop multiplexer and cross connects. Since dense wavelength multiplexing forms the physical layer for intelligent optical networking, the roll of high s...
متن کاملTunable integrated optical filter made of a glass ion-exchanged waveguide and an electro-optic composite holographic grating.
We report the fabrication and the optical characterization of a hybrid tunable integrated optical filter. It consists of a diffused ion-exchanged channel waveguide on a borosilicate glass substrate with a cover of the same glass to form a gap filled with a holographic grating. The grating morphology, called POLICRYPS (POlymer LIquid CRYstal Polymer Slices), is made of alternating stripes of pol...
متن کاملDesign of ultra fast 2x2 electro-optic polymer waveguide switch for protection in intelligent optical networks
This paper presents design of an ultra high speed 2x2 polymer electro-optic waveguide switch. Proposed switch has very short switching time (0.47 ps) and trapezoidal grating has following optimized parameters: coupling length, 81 mm; and switching voltage at operating wavelength of 1550 nm, 8.5 V. Proposed switch with smaller size, lower requirement of drive voltage and shorter switching time t...
متن کاملImproved performance of traveling wave directional coupler modulator based on electro-optic polymer
Polymer based electro-optic modulators have shown great potentials in high frequency analog optical links. Existing commercial LiNibO3 Mach-Zehnder modulators have intrinsic drawbacks in linearity to provide high fidelity communication. In this paper, we present the design, fabrication and characterization of a traveling wave directional coupler modulator based on electro-optic polymer, which i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 13 12 شماره
صفحات -
تاریخ انتشار 2005