Fluorescence Spectroscopy and Chemometric Modeling for Bioprocess Monitoring
نویسندگان
چکیده
On-line sensors for the detection of crucial process parameters are desirable for the monitoring, control and automation of processes in the biotechnology, food and pharma industry. Fluorescence spectroscopy as a highly developed and non-invasive technique that enables the on-line measurements of substrate and product concentrations or the identification of characteristic process states. During a cultivation process significant changes occur in the fluorescence spectra. By means of chemometric modeling, prediction models can be calculated and applied for process supervision and control to provide increased quality and the productivity of bioprocesses. A range of applications for different microorganisms and analytes has been proposed during the last years. This contribution provides an overview of different analysis methods for the measured fluorescence spectra and the model-building chemometric methods used for various microbial cultivations. Most of these processes are observed using the BioView® Sensor, thanks to its robustness and insensitivity to adverse process conditions. Beyond that, the PLS-method is the most frequently used chemometric method for the calculation of process models and prediction of process variables.
منابع مشابه
2D fluorescence spectroscopy for real-time aggregation monitoring in upstream processing
Introduction Product aggregation is one side effect of rising yields due to process improvement and therefore accompanied with massive product loss during downstream processing (DSP). But it is already in literature described, that product aggregation also occurs during the fermentation process and is caused by various process operations [1]. Real-time bioprocess monitoring and thus on-line pro...
متن کاملBioreactor monitoring with spectroscopy and chemometrics: a review.
Biotechnological processes are crucial to the development of any economy striving to ensure a relevant position in future markets. The cultivation of microorganisms in bioreactors is one of the most important unit operations of biotechnological processes, and real-time monitoring of bioreactors is essential for effective bioprocess control. In this review, published material on the potential ap...
متن کاملChemometric Modelling based on 2D-Fluorescence Spectra without a Calibration Measurement
MOTIVATION 2D fluorescence spectra provide information from intracellular compounds. Fluorophores like trytophan, tyrosine and phenylalanin as well as NADH and flavins make the corresponding measurement systems very important for bioprocess supervision and control. The evaluation is usually based on chemometric modelling using for their calibration procedure off-line measurements of the desired...
متن کاملPerformance monitoring of a mammalian cell based bioprocess using Raman spectroscopy.
Being able to predict the final product yield at all stages in long-running, industrial, mammalian cell culture processes is vital for both operational efficiency, process consistency, and the implementation of quality by design (QbD) practices. Here we used Raman spectroscopy to monitor (in terms of glycoprotein yield prediction) a fed-batch fermentation from start to finish. Raman data were c...
متن کاملApplication of Raman Spectroscopy and Univariate Modelling As a Process Analytical Technology for Cell Therapy Bioprocessing
Cell therapies offer unquestionable promises for the treatment, and in some cases even the cure, of complex diseases. As we start to see more of these therapies gaining market authorization, attention is turning to the bioprocesses used for their manufacture, in particular the challenge of gaining higher levels of process control to help regulate cell behavior, manage process variability, and d...
متن کامل