Multi-shape active composites by 3D printing of digital shape memory polymers
نویسندگان
چکیده
Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.
منابع مشابه
3d Printing of Shape Changing Polymer Structures: Design and Characterization of Materials
Additive manufacturing (AM) gives engineers unprecedented design and material freedom, providing the ability to 3D print polymer structures that can change shape. Many of these Shape Memory Polymer (SMP) structures require multi-material composites, and different programmed shapes can be achieved by designing and engineering these composites to fold and unfold at different rates. To enable SMP ...
متن کاملShape-morphing composites with designed micro-architectures
Shape memory polymers (SMPs) are attractive materials due to their unique mechanical properties, including high deformation capacity and shape recovery. SMPs are easier to process, lightweight, and inexpensive compared to their metallic counterparts, shape memory alloys. However, SMPs are limited to relatively small form factors due to their low recovery stresses. Lightweight, micro-architected...
متن کاملReview of Progress in Shape Memory Epoxies and Their Composites
Shape memory polymer (SMP) is capable of memorizing one or more temporary shapes and recovering successively to the permanent shape upon various external stimuli. Beside of the above mentioned one-way variants, also two-way shape memory polymers (SMPs) and shape memory (SM) systems exist which feature a reversible shape change on the basis of “on-off switching” of the external stimulus. The pre...
متن کاملMultimaterial 4D Printing with Tailorable Shape Memory Polymers
We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures. The approach is based on high resolution projection microstereolithography (PμSL) and uses a family of photo-curable methacrylate based copolymer networks. We designed the constituents and compositions to exhibit desired thermomechanical behavior (...
متن کاملA 3d Micro-Plane Model for Shape Memory Alloys
are compared with the experimental results. In these test results the shape memory alloys behavior as: super elasticity under various temperatures, loading rate effects, asymmetry in tension and pressure, various loops of loading and unloading, hydrostatic pressure effects, different proportional tension-shear biaxial loading and unloading, and also deviation from normality due to non-proportio...
متن کامل