Compact Microstrip Dual-mode Dual-band Band-pass Filters Using Stubs Loaded Cou- Pled Line

نویسندگان

  • Jin Xu
  • Wen Wu
چکیده

This paper presents two novel dual-mode dual-band bandpass filters (BPFs) by using stubs loaded coupled line. The analytical equations of their transmission poles and transmission zeros are given by the classical even-/odd-mode method. Design rules for two dual-band BPFs are also given, which show the easily tuned passband frequency locations and in-band performance. As examples, two dualmode dual-band BPFs, dual-band filter A with central frequencies (CFs) at 3.5/6.8 GHz and −3 dB fractional bandwidth (FBW) of 14%/10%, while dual-band filter B with CFs at 2.4/6.8 GHz and −3 dB FBW of 43%/16% are designed, fabricated and measured. Good agreement can be observed between the simulations and measurements. These two filters exhibit simple design procedures, simple physical topology, low insertion losses, good return losses, high isolation and compact sizes.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of Compact Multi-Channel Diplexer Using Defected Microstrip Structure

In this paper, two compact quad-channel and six-channel diplexer are designed and fabricated using defected microstrip structure (DMS). This structure is designed for the desired frequency based on the literature reviews. The proposed configuration is composed of a conventional T-junction divider with two pairs of open bended stubs and dual/tri-band filters. In designing dual band filters, a lo...

متن کامل

Synthesizing Microstrip Dual-Band Bandpass Filters Using Frequency Transformation and Circuit Conversion Technique

A novel method is proposed to synthesize dual-band bandpass filters (BPFs) from a prototype lowpass filter. By implementing successive frequency transformations and circuit conversions, a new filter topology is obtained which consists of only admittance inverters and series or shunt resonators, and is thereby easy to be realized by using conventional distributed elements. A microstrip dual-band...

متن کامل

Dual-Band Evanescent-Mode Substrate Integrated Waveguide Band-pass Filter for WLAN Applications

A new multi-layer substrate integrated waveguide (SIW) structure is developed to design dual-band evanescent-mode band-pass filters (BPFs). Two independent series LC circuits are implemented by incorporating metallic irises in the different layers of the structure. The combination of the metallic irises with capacitive-plates is embedded inside the SIW to independently excite two evane...

متن کامل

Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)

A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...

متن کامل

A Compact UWB Bandpass Filter with High Selectivity and Dual Notched-Band

A novel compact-sized ultra-wideband (UWB) bandpass filter (BPF) is proposed in this paper. The proposed BPF is highly selective and is able to eliminate WLAN signals from 5.15-5.35 GHz, and downlink of X-band satellite communication signals from 7.25-7.75 GHz. Generally, a multiple-mode resonator (MMR), comprised of a U-shaped line, with two high impedance stubs connected to it, and one steppe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013