Investigation on a Rock-breaking Drilling Mechanism by Using a High Pressure Jet Bit
نویسندگان
چکیده
How to effectively transfer and exert a pressure on drills in lateral drilling, and to raise the efficiency of rock-breaking and rate of penetration in a bid, is the key technology to improve the quality, speed and economic benefits of lateral drilling. Therefore, based on high pressure jet of 16-hole and 7-hole nozzles, which are suitable for lateral drilling in oilfield at the present stage, we carry out a research on the hydraulic calculation of high pressure water jet flow and the mechanism of rock-breaking. We use threedimensional modeling software to establish models, and analyze the high pressure water jet velocity field combined with numerical simulation software. According to different injection, we calculate the local head of the two nozzles when the working fluid is pure water and the liquid-solid two phases of 4% solid content respectively, through the simulated relational expression between the local head and the injection rate to calculate the maximum speed of each hole and to ensure rock-breaking critical injection of 16-hole and 7-hole nozzles, then compare and analyze the rock-breaking effect of these two kinds of drill bits, at the same time to analyze the influence of nozzles angle on the effect of rock-breaking, so as to optimize the perfect angle of the nozzle and to provide theoretical basis for the popularization and application of lateral drilling high pressure jet rock-breaking..
منابع مشابه
Waterjet Assisted Polycrystalline Diamond Indentation Drilling of Rock
The use of high-pressure waterjets as a method for enhancing the performance of mechanical cutting tools has been well documented over the years. However, concurrent with this development for drag bit tools, there has been some evidence that the combination was not an effective one. By using sectioned samples of rock indented with a spherical indentor (of the type used in percussive drilling) t...
متن کاملThe Effect of Stress on Water Jet Performance
Research on the use of high pressure water jet systems to date has mainly concentrated on laboratory simulation tests and field trials on the surface. The effects of field stress have only been simulated, therefore, by sample confinement in triaxial chambers. This paper contrasts such results with data obtained from a test site located 1000 ft below the surface in a stressed barrier pillar. Dat...
متن کاملStudying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran
Multiplicity of the effective factors in drilling reflects the complexity of the interaction between rock mass and drilling bit, which is followed by the dependence of parameters and non-linear relationships between them. Rock mass or, in other words, the formation intended for drilling, as the drilling environment, plays a very essential role in the drilling speed, depreciation of drilling bit...
متن کاملAn Estimation of Required Rotational Torque to Operate Horizontal Directional Drilling Using Rock Engineering Systems
Horizontal directional drilling (HDD) is widely used in soil and rock engineering. In a variety of conditions, it is necessary to estimate the torque required for performing the reaming operation. Nevertheless, there is not presently a convenient method to accomplish this task. In this paper, to overcome this difficulty based on the basic concepts of rock engineering systems (RES), a model for ...
متن کاملInvestigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE)
This paper reviews existing studies and investigates thermal operational regimes of diamond bit during drilling operations. The operating temperature of the diamond core drill is studied under bench condition and an optimal thermal range are presented. Based on this study, it was noted that glazing of diamond tools is observed at temperatures less than 327°C, and normal wear of diamond tools is...
متن کامل