Demonstration of Logic Operations in High-Performance RRAM Crossbar Array Fabricated by Atomic Layer Deposition Technique
نویسندگان
چکیده
In this paper, resistive random access memory (RRAM)-based crossbar arrays with the cell structure of Pt/[AlO y /HfO x ] m /TiN were fabricated by using atomic layer deposition (ALD) technique. The RRAM devices in the arrays show excellent performances such as good uniformity and high reliability. Based on the fabricated RRAM array, a complete set of basic logic operations including NOR and XNOR were successfully demonstrated.
منابع مشابه
Development and Characterization of metal oxide RRAM memory cells
In this work a new class of non-volatile memories, based on metal oxide resistive switching is studied. Resistive ram cells based on ALD grown HfO2 and Al2O3 layers are fabricated by means of optical lithography in multiple dimensions and two different configurations: in via and crossbar. On the next step, the cells are structurally and electrically characterized. The effects of material choice...
متن کاملThermal crosstalk in 3-dimensional RRAM crossbar array
High density 3-dimensional (3D) crossbar resistive random access memory (RRAM) is one of the major focus of the new age technologies. To compete with the ultra-high density NAND and NOR memories, understanding of reliability mechanisms and scaling potential of 3D RRAM crossbar array is needed. Thermal crosstalk is one of the most critical effects that should be considered in 3D crossbar array a...
متن کاملHigh-density crossbar arrays based on a Si memristive system.
We demonstrate large-scale (1 kb) high-density crossbar arrays using a Si-based memristive system. A two-terminal hysteretic resistive switch (memristive device) is formed at each crosspoint of the array and can be addressed with high yield and ON/OFF ratio. The crossbar array can be implemented as either a resistive random-access-memory (RRAM) or a write-once type memory depending on the devic...
متن کاملTe 5 layer used as solid electrolyte in Conductive - Bridge memory devices fabricated on flexible substrate
This paper shows that the well-know chalcogenide Ge2Sb2Te5 (GST) in its amorphous state may be advantageously used as solid electrolyte material to fabricate Conductive-Bridge Random Access Memory (CBRAM) devices. GST layer was sputtered on preliminary inkjet-printed silver lines acting as active electrode on either silicon or plastic substrates. Whatever the substrate, the resistance switching...
متن کاملBipolar Resistive Switching Characteristics of HfO2/TiO2/HfO2 Trilayer-Structure RRAM Devices on Pt and TiN-Coated Substrates Fabricated by Atomic Layer Deposition
The HfO2/TiO2/HfO2 trilayer-structure resistive random access memory (RRAM) devices have been fabricated on Pt- and TiN-coated Si substrates with Pt top electrodes by atomic layer deposition (ALD). The effect of the bottom electrodes of Pt and TiN on the resistive switching properties of trilayer-structure units has been investigated. Both Pt/HfO2/TiO2/HfO2/Pt and Pt/HfO2/TiO2/HfO2/TiN exhibit ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 12 شماره
صفحات -
تاریخ انتشار 2017