Stretcher Operation of the 100 Mev Disc-load Electron Linac at Icr, Kyoto University
نویسندگان
چکیده
Stretcher operation of the electron storage ring, KSR has been tested with 80 MeV electron beam. Beam injection with closed orbit control and beam extraction channel consisting of the electrostatic septum with 70 kV/cm and septum magnet of 5kG with septum thickness of 14 mm have been completed. Beam spill can be enlarged to ~1 s by the slow extraction with combined use of the third order resonance and RFKO.
منابع مشابه
Benchmarking of Siemens Linac in Electron Modes: 8-14 MeV Electron Beams
Introduction: Radiation therapy using electron beams is a promising method due to its physical dose distribution. Monte Carlo (MC) code is the best and most accurate technique for forespeaking the distribution of dose in radiation treatment of patients.Materials and Methods: We report an MC simulation of a linac head and depth dose on central axis, along with profile calculations. The purpose o...
متن کاملDental Materials Effect in Neutron Contamination: Electron Mode of a Linac
Background: Neutron contamination is produced in electron beams of linac when tooth or dental materials are located in the path of beam. Objective: This study aims to determine the neutron dose contamination from different dental restoration materials in electron mode of a linac. Material and Methods: In this experimental study, the neutron dose contamination was calculated in the p...
متن کاملAn assessment of the Photon Contamination due to Bremsstrahlung Radiation in the Electron Beams of a NEPTUN 10PC Linac using a Monte Carlo Method
Introduction: In clinical electron beams, most of bremsstrahlung radiation is produced by various linac head structures. This bremsstrahlung radiation dose is influenced by the geometry and construction of every component of the linac treatment head structures. Thus, it can be expected that the amount of the contaminated photon dose due to bremsstrahlung radiation varies among different linacs,...
متن کاملA 100 Mev Injector Linac for the Swiss Light Source Supplied by Industry
A 100 MeV ‘turn-key’ injector electron linac for the Swiss Light Source (SLS) is under construction at ACCEL Instruments. The system will be installed, commissioned and handed over to the SLS in late 1999, after a 18 month design and production period. This paper will present the special needs of an injector for a third generation synchrotron light source and the two specific modes of operation...
متن کاملNew Applications for Linear Electron Accelerators*
Electron linacs in the 100 MeV to 25 GeV energy range have by now been in operation for periods ranging from one year to over 20 years. In 1951 the Mark III accelerator at Stanford became the first electron linac to exceed an energy of 100 MeV. Since then significant increases in maximum electron energy have been made by the h'Iark III (reaching an energy of 1 GeV in 1960) and SLAC (exceeding 2...
متن کامل