Development of the Modeling for Biped Robot using Inverse Kinematics
نویسنده
چکیده
Abstract: The legged robot can only walk very similar to human walking pattern. Therefore, many robots have been researched and developed in recent years. However, the biped robots still have many issues for the natural human walking in terms of the redundant degree of freedom, complexity of the kinematics, and stability. In this paper, we have described our biped robot modeling in the forward and inverse kinematics and gotten the results of the simulation for the proposed walking pattern. For the modeling and simulation, we apply some kind of theory such as ZMP, D-H notation, and forward or inverse kinematics to the biped robot.
منابع مشابه
Design, Modeling, Implementation and Experimental Analysis of 6R Robot (TECHNICAL NOTE)
Design, modeling, manufacturing and experimental analysis of a six degree freedom robot, suitable for industrial applications, has been described in this paper. The robot was designed on the assumption that, each joint has an independent DC motor actuator, with gear reduction and measuring sensor for angular joint position. Mechanical design of the robot was done using Mechanical Desktop and ma...
متن کاملIK-PSO, PSO Inverse Kinematics Solver with Application to Biped Gait Generation
This paper describes a new approach allowing the generation of a simplified Biped gait. This approach combines a classical dynamic modeling with an inverse kinematics’ solver based on particle swarm optimization, PSO. First, an inverted pendulum, IP, is used to obtain a simplified dynamic model of the robot and to compute the target position of a key point in biped locomotion, the Centre Of Mas...
متن کاملDynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...
متن کاملSolution of Inverse Kinematic Problem of a 2DOF Robot Using Decomposition Method
The inverse kinematics problem of a two degree of freedom (2DOF) planar robot arms issolved using Adomian’s decomposition method (ADM), after converting to a system of twononlinear algebraic equations. The advantage of the method is that it gives the solutions asfunctions of the desired position of the end effecter and the length of the arms. The accuracyof the solutions can be increased up to ...
متن کاملModeling and Kinematic Analysis of the Biped Robot
Biped robots are intricate in design, with more degrees of freedom (DOF) because of the challenging goal of imitating humanoid gait. This paper gives a very simple architecture of the biped robot have three degrees of freedom (DOF)in each leg, one DOF for hip joint and one corresponding to the knee and ankle joint respectively. Denavit-Hartenberg parameter is being used to obtain the solution f...
متن کامل