High-strength age hardening copper–titanium alloys: redivivus

نویسندگان

  • W. A. Soffa
  • D. E. Laughlin
چکیده

In this review the decomposition of supersaturated Cu–Ti solid solutions and subsequent microstructural evolution are discussed in terms of modern views of precipitation from solid solution. This update is motivated by an anticipated emergence of these alloys as technologically significant high-strength, high-conductivity, precipitation hardened alloys over the next decade replacing conventional Cu–Be alloys in numerous applications. The decomposition of Cu–Ti alloys is shown to involve a complex interplay between clustering and ordering effects including a synergy between LRO and SRO similar to those observed in Ni4Mo-type concentrated solutions. New perspectives regarding metastable and stable phase equilibria in the system are discussed including the polymorphic nature of the Cu4Ti precipitate phase. The role of non-classical nucleation and spinodal decomposition in the initial breakdown of the supersaturated state is addressed within the context of a generalized nucleation theory. The fine-scale coherent/semicoherent two-phase mixtures which emerge coarsen according to a LSW coarsening law with an activation energy for the diffusion of Ti in Cu of approximately 50 kcal mol 1 in excellent agreement with reported values from diffusion studies in the Cu–Ti system. Overaging in Cu–Ti age hardening alloys is associated with the emergence of a coarse lamellar microconstituent which nucleates at the grain boundaries of the parent matrix phase and the growth of these cells consumes the metastable, fine-scale coherent/semicoherent phase mixtures leading to a rapid degradation of mechanical properties. The activation energy for the growth of the cellular microconstituent is less than half that for bulk diffusion indicating interfacial/boundary diffusion control. It is suggested that to enhance and optimize the mechanical properties of the precipitation hardened Cu–Ti alloys, alloying and thermomechanical processing strategies should focus on controlling the nucleation and growth of the cellular or ‘‘discontinuous’’ precipitation reaction. # 2003 Elsevier Ltd. All rights reserved. Progress in Materials Science 49 (2004) 347–366 www.elsevier.com/locate/pmatsci 0079-6425/03/$ see front matter # 2003 Elsevier Ltd. All rights reserved. doi:10.1016/S0079-6425(03)00029-X * Corresponding author. Tel.: +1-412-268-2706; fax: +44-412-268-7169. E-mail address: [email protected] (D.E. Laughlin).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Precipitation Hardening of Metal Alloys

Precipitation hardening, or age hardening, provides one of the most widely used mechanisms for the strengthening of metal alloys. The fundamental understanding and basis for this technique was established in early work at the U. S. Bureau of Standards on an alloy known as Duralumin [1,2]. Duralumin is an aluminum alloy containing copper and magnesium with small amounts of iron and silicon. In a...

متن کامل

Precipitation Hardening Behavior of Directly Cold Rolled Al-6Mg Alloy Containing Ternary Sc and Quaternary Zi/Ti

Ageing of 75% cold rolled Al-6Mg alloy with ternary 0.4 wt% scandium and quaternary zirconium and titanium has been carried out. Alloy samples are naturally, isochronally and isothermally aged for different time and temperatures. Hardness values of the differently processed alloys have been measured to understand the ageing behavior of Al-6Mg alloy with scandium and quaternary zirconium and tit...

متن کامل

Machinability evaluation of Titanium alloy in Laser Assisted Turning

The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...

متن کامل

Machinability of Experimental Ti-Cu Alloys

This study is an investigation of the machinability of experimental Ti-Cu alloys (2, 5, and 10mass% Cu) as new dental titanium alloy candidates for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Their machinability was evaluated through cutting force using a three-component force transducer fixed on the table of th...

متن کامل

Effect of Controlled Rolling Parameters on the Ageing Response of an Hsla-80 Steel

Microalloyed steels containing copper in order to promote precipitation hardening are one of the approaches adopted to develop new materials with high mechanical strength but minimized carbon content to assure good weldability. Besides that, the thermomechanical processing of such alloys can eliminate the subsequent quench and tempering heat treatments required by conventional steels. The effec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004