Low-loss, submicron chalcogenide integrated photonics with chlorine plasma etching
نویسندگان
چکیده
Articles you may be interested in Surface encapsulation for low-loss silicon photonics Appl. Fabrication of high-Q chalcogenide photonic crystal resonators by e-beam lithography Appl.
منابع مشابه
Low-loss photonic device in Ge-Sb-S chalcogenide glass.
Low-loss waveguides constitute an important building block for integrated photonic systems. In this work, we investigated low-loss photonic device fabrication in Ge23Sb7S70 chalcogenide glass using electron beam lithography followed by plasma dry etching. High-index-contrast waveguides with a low propagation loss of 0.5 dB/cm and microdisk resonators with an int...
متن کاملReactive ion etching of tellurite and chalcogenide waveguides using hydrogen, methane, and argon*
The authors report in detail on the reactive plasma etching properties of tellurium and demonstrate a high quality etching process using hydrogen, methane, and argon. Very low loss planar ridge waveguides are demonstrated. Optical losses in tellurium dioxide waveguides below 0.1 dB/cm in most of the near infrared region of the electromagnetic spectrum and at 1550 nm have been achieved—the lowes...
متن کاملSoft-mask fabrication of gallium arsenide nanomembranes for integrated quantum photonics.
We report on the fabrication of quantum photonic integrated circuits based on suspended GaAs membranes. The fabrication process consists of a single lithographic step followed by inductively coupled-plasma dry etching through an electron-beam-resist mask and wet etching of a sacrificial layer. This method does not require depositing, etching, and stripping a hard mask, greatly reducing fabricat...
متن کاملFabrication and testing of planar chalcogenide waveguide integrated microfluidic sensor.
We have fabricated and tested, to the best of our knowledge, the first microfluidic device monolithically integrated with planar chalcogenide glass waveguides on a silicon substrate. High-quality Ge(23)Sb(7)S(70) glass films have been deposited onto oxide coated silicon wafers using thermal evaporation, and high-index-contrast channel waveguides have been defined using SF(6) plasma etching. Mic...
متن کاملAnalysis of the etching of silicon in an inductively coupled chlorine plasma using laser thermal desorption
The etching of silicon by a chlorine inductively coupled plasma ~ICP! was studied using laser desorption laser-induced fluorescence ~LD-LIF! analysis to determine the surface coverage of chlorine during steady-state etching. Laser interferometry was used to measure etch rates, and optical emission actinometry and Langmuir probe analysis were used to characterize the plasma. The ICP operated in ...
متن کامل