Effect of four commercial mouth rinses on the microhardness and solubility of a supra nanocomposite and a microhybrid composite: An in vitro study
نویسندگان
چکیده
The aim of this study was to compare and evaluate the effect of four commercially available mouth rinses on the microhardness and solubility of a newly introduced resin-composite namely Estelite® α with Filtek TM P60. The microhybrid and the supra-nano composites used in this study are Filtek TM P60 and Estelite® α respectively. A total of 108 (N) specimens (54 for each resin composite) were fabricated and were further divided into 4 subgroups according to the mouth rinse used as followssubgroup 1Listerine; subgroup 2Colgate Plax; subgroup 3-HiOra; sub-group 4Clohex Plus. Subgroup 5 consisted of the remaining 12 specimens which served as controls (distilled water). Change in the microhardness and solubility of both the resin composites were determined after exposure to all the five test solutions. For microhardness, intra-group comparison showed significant reduction in the microhardness in all the subgroups in both the tested resin-composites (p < 0.001). Inter-group comparison showed that the difference in microhardness between the groups was statistically significant only for Colgate Plax (p < 0.001) and HiOra (p < 0.05). For solubility, maximum solubility was presented by Listerine and minimum by HiOra in both the resin-composites. Inter-group comparison showed that the difference in the solubility of the two resin-composites was statistically significant only for HiOra (p < 0.05). Specimens tested in distilled water did not show any significant change for both the tested parameters (p > 0.05). Following conclusions can be drawn from the present study(1) All the mouth rinses used in the study, irrespective of the presence or absence of alcohol reduced the microhardness of both the tested resincomposites. (2) Alcohol content is not the only factor in mouth rinses that can degrade materials. (3) Alcohol-free mouth rinses may be preferable to alcohol containing mouth rinses in patients with extensive restorations.
منابع مشابه
In-Vitro Comparative Study of the Effect of Four Finishing and Polishing Tools on Surface Roughness of a Microhybrid Resin Composite
Background and Aim: The complications of unwanted surface roughness of composite restorations are highly common due to the increasing use of this restorative material. Therefore, the present study was designed to compare the effect of four finishing and polishing (F&P) tools on surface roughness of microhybrid resin composites. Materials and Methods: This experimental study was performed on 42...
متن کاملComparison of the effect of two mouthwashes with alcohol and without alcohol on microhardness changes of two types of composite resins(in vitro)
Abstract Background & Aim: Considering the widespread use of composite restorations and the provision of nanocomposites on one side and the common use of mouthwashes, there are concerns about the microhardness of composites and their known complications following mouthwashes. So, the present study was aimed to compare the effect of two mouthwash with alcohol and without alcohol on microhardness...
متن کاملبررسی جذب آب، حلالیت و ریزسختی سطحی سه نوع کامپوزیت رزینی نانوهیبرید در طول 60 روز ذخیره در آب
Background and Aims: Microhardness, sorption, and solubility are useful predictors of a resin composite’s clinical success. This study aimed to evaluate the effect of 60 days of water storage on the microhardness, sorption, and solubility of 3 commercial nanohybrid resin composites. Materials and Methods: Three nanohybrid composites were evaluated: GC Kalore (GC), Aura (SDI), and G-&aeli...
متن کاملEffect of five commercial mouth rinses on the microhardness of a nanofilled resin composite restorative material: An in vitro study
AIM AND OBJECTIVES This in vitro study was designed to comparatively evaluate the effect of five commercial mouth rinses on the micro hardness of a nanofilled resin based restorative material. MATERIALS AND METHODS Fifty specimens of resin composite material (Filtek Z350XT, 3M ESPE, St.Paul, MN USA) were prepared and immersed in artificial saliva for 24 h. The base line micro hardness of spec...
متن کاملEffects of Wet and Dry Finishing and Polishing on Surface Roughness and Microhardness of Composite Resins
Objectives This study aimed to assess the effect of wet and dry finishing and polishing on microhardness and roughness of microhybrid and nanohybrid composites. Materials and Methods Thirty samples were fabricated of each of the Polofil Supra and Aelite Aesthetic All-Purpose Body microhybrid and Grandio and Aelite Aesthetic Enamel nanohybrid composite resins. Each group (n=30) was divided int...
متن کامل