Photo-derived transformation from modified chitosan@calcium carbonate nanohybrids to nanosponges

نویسنده

  • Jeong Hoon Byeon
چکیده

Zwitterionic chitosan (ZC)@calcium carbonate (CC) nanoparticles were conveniently obtained and transformed to biocompatible nanosponges by continuous gas-phase photo-derived transformation in a single-pass configuration, and their potential use for biomedical applications was investigated. The mean diameter of the ZC@CC sponges was ~166 nm (~72 nm for CC and, ~171 nm for ZC), and the sponges had a mesoporous structure (i.e., an average pore diameter of ~13 nm). Measurements of the sponge cytotoxicity were performed and only a slight decrease was observed (>78% in cell viability) when compared with pure ZC (>80%). The ZC@CC sponges had a similar transfection ability to lipofectamine (~2.7 × 10(9) RLU mg(-1) protein) at a 50:1 ratio of sponge:DNA weight. Because of a porous structure, the sponges showed remarkably higher transfection efficiencies than pure ZC.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Biomimetic mineralisation of polymeric scaffolds using a combined soaking and Kitano approach.

Chitosan hydrogels are of considerable interest in synthetic biomimetic mineralisation strategies due to their favourable characteristics such as the presentation of a large surface area for crystal nucleation within a structured yet responsive scaffold. Chitosan hydrogels were prepared and subsequently calcium carbonate mineralisation was initiated using a method which combines alternate soaki...

متن کامل

Cure Characteristics and Physico-mechanical Properties of the Stearic Acid Surface of Modified Calcium Carbonate Reinforcement NR/SBR Compounds

Calcium carbonate is a cheap and readily available filler used in rubber industry. This material is not compatible with rubber matrix, so many researchers have tried to modify its surface with various materials in order to increase its hydrophobicity and improve compatibility with the rubber matrix. In this effort, surface modification of calcium carbonate was carried out by 1.5%, 3% and 4% ste...

متن کامل

How important is polyelectrolyte complex formation in biomimetic mineralisation? Manipulation via alcohol addition.

Understanding the formation of biominerals like nacre can lead to the fabrication of more advanced biomimetic materials. Several factors are known to influence the final form of both native nacre and biomimetic synthetic variants. Two important components in calcium carbonate biominerals such as nacre are the organic scaffold and the acidic proteins. Interactions between these two components ma...

متن کامل

Synthesis and Characterisation of CaCO3 (Calcite) Nano Particles from Cockle Shells Using Chitosan as Precursor

Calcium carbonate nano particles were synthesized using precipitation method from cockle shells by employing chitosan as precursor. Synthesized Calcium carbonates were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-Visible and FTIR Spectroscopy. The results were compared with commercial calcium carbonate nano particles. Cockle shells are the potential source...

متن کامل

Chitosan Fibers Modified with HAp/β–TCP Nanoparticles

This paper describes a method for preparing chitosan fibers modified with hydroxyapatite (HAp), tricalcium phosphate (β-TCP), and HAp/β-TCP nanoparticles. Fiber-grade chitosan derived from the northern shrimp (Pandalus borealis) and nanoparticles of tricalcium phosphate (β-TCP) and hydroxyapatite (HAp) suspended in a diluted chitosan solution were used in the investigation. Diluted chitosan sol...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2016