RECYCLING OF AlMgSi1 ALUMINIUM CHIPS BY COLD COMPRESSION
نویسنده
چکیده
Current work elaborates possibilities for direct conversion of AlMgSi1 aluminium chips into solid billets by solid state recycling. Milling chips from an aluminium alloy were cold compressed in a closed cylindrical die by means of a 2,5 MN hydraulic press. Due to low initial relative density of the chips, several pre-compressions were needed. In order to establish the infl uence of chip geometry on the fi nal density of billets diff erent types of chips were cut by using various milling regimes. The infl uence of a compression regime due to various chip types were followed by load–stroke diagrams. Up to 97 % of density measured at extruded aluminium was attained for one type of chips. Results show that the shapes of the chips and their size (especially thickness) have a considerable infl uence on the fi nal integrity of billets.
منابع مشابه
Hot Press Forging as the Direct Recycling Technique of Aluminium – a Review
Aluminium is totally recyclable with no downgrading of its qualities, but in the process of typical conventional aluminium recycling, there are quite a number of negative impacts. The recycling of aluminium and its alloys by direct recycling method is relatively simple, consumes small amount of energy, produce small amount of waste and does not have a harmful effect on the environment. This app...
متن کاملHot Press as a Sustainable Direct Recycling Technique of Aluminium: Mechanical Properties and Surface Integrity
Meltless recycling technique has been utilized to overcome the lack of primary resources, focusing on reducing the usage of energy and materials. Hot press was proposed as a novel direct recycling technique which results in astoundingly low energy usage in contrast with conventional recycling. The aim of this study is to prove the technical feasibility of this approach by characterizing the rec...
متن کاملFactors Affecting the Metal Recovery Yield During Induction Melting of Aluminium Swarf
Machining operations of cast parts usually generate considerable amounts of waste in the form of chips (usually 3–5% of the casting weight). Traditionally, swarf is sold to scrapers and remelters, but this option is quite expensive because the selling price is roughly 30% of the acquisition price of the commercial 2nd melt raw material. For most aluminium foundries that incorporate machining op...
متن کاملThe Investigation of Modelling Material Behavior in Autofrettaged Tubes Made from Aluminium Alloys
Normal 0 false false false EN-US X-NONE AR-SA The ratio of compression yield strength to the initial tensile yield strength is called Bauschinger effect factor, BEF. A nonlinear strain hardening mathematical model is proposed for 7075 aluminium alloy (A7075). Uniaxial tension-compression experimental data are used to figure out a suitable model to study the BEF. Hence, uniaxial tension-co...
متن کاملFatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy
This study examines the fatigue and anisotropy behaviour of cold rolled AA1200 aluminium alloy for light weight automotive connecting rod application. Aluminium (Al) 1200 ingots were melted at temperature of 680 0C (after one hour of heating) cast in sand mould and cast samples homogenized for 6 hrs at 480 0C. The cold rolling process was carried out after homogenisation for 10, 20, 30, 40 and ...
متن کامل