The Use of a Pressure-Indicating Film to Determine the Effect of Liner Type on the Measured Teat Load Caused by a Collapsing Liner
نویسندگان
چکیده
During milking the teat cup liner is the interface between the teat of a dairy cow and the milking system, so it should be very well adapted to the teat. Therefore, the aim of the present study was to determine the effect of liner type on the directly measuring teat load caused by a collapsing liner with a pressure-indicating film. The Extreme Low pressure-indicating film was used to detect the effect of six different liners on teat load. For each liner, six positions in the teat cup were specified, and six repetitions were performed for each position with a new piece of film each time. Analysis of variance was performed to detect differences between the six liners, the positions within a liner, and the measuring areas. The pressure applied to the teat by a liner depends on the technical characteristics of the liner, especially the shape of the barrel, and for all tested liners, a higher teat load was found at the teat end. In conclusion, with the help of pressure-indicating film, it is possible to determine the different effects of liner type by directly measuring teat load due to liner collapse.
منابع مشابه
The Usability of a Pressure-Indicating Film to Measure the Teat Load Caused by a Collapsing Liner
Prevention of damage to the teat and mastitis requires determination of the teat load caused by a collapsing liner. The aim of this study was to test a pressure-indicating film designed to measure the pressure between a collapsing liner and artificial teats. The Ultra Super Low and the Extreme Low pressure-indicating films were tested on two types of artificial teat. The experiments were perfor...
متن کاملAn Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM
The shell liner type, rotation speed, and ball filling percent are the key factors influencing the charge behavior inside the SAG mills, and consequently, their performance. In this work, the milling operation of industrial SAG mills is investigated using the Discrete Element Method (DEM). First, an industrial SAG mill with dimensions of 9.50 m × 4.42 m that has a Smooth-type liner is sim...
متن کاملLiners and Teat End Health
In the dairy industry world wide, several hundred types of liners are used to milk dairy cows. The enormous amount of liner types with different characteristics in size, form, consistency and other design and manufacturing characteristics indicate that no ‘best’ liner has been identified in the last 60 or so years since machine milking has become the common method for milk harvesting. Mechanica...
متن کاملEffect of liner design, pulsator setting, and vacuum level on bovine teat tissue changes and milking characteristics as measured by ultrasonography
: Friesian-type dairy cows were milked with different machine settings to determine the effect of these settings on teat tissue reaction and on milking characteristics. Three teat-cup liner designs were used with varying upper barrel dimensions (wide-bore WB = 31.6 mm; narrow-bore NB = 21.0 mm; narrow-bore NB1 = 25.0 mm). These liners were tested with alternate and simultaneous pulsation patter...
متن کاملA New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE)
The significant costs insert on mineral processes due to mill liner wear including the labor costs, price of material and shut down periods. Therefore, the study of this phenomenon is economically important to optimize the mill operating conditions and liner profile design to decrease the wear rate. There is no appropriate and applicable research on impact wear evaluation of mill liners. In the...
متن کامل