Fabrication and characterization of boron-related nanowires
نویسندگان
چکیده
A thermal vapor transport process has been employed for fabrication of boron-related (boron, boron–silicon alloys, and MgB2) nanowire films on Au-coated Si and MgO substrates. Tangled polycrystalline as well as aligned single-crystalline boron nanowires (BNWs) have been obtained and their growth mechanism investigated at different growth temperatures, cooling rates, and vapor sources. The growth temperature was found critical to the nucleation of the BNWs and different growth modes were observed in different temperature ranges. The temperature ramping rate in the cooling process after the high-temperature growth of the BNWs was found crucial for the formation of crystalline structures and for controlling the alignment of BNWs. We have observed that slow cooling at 1–5 8C/min resulted in non-textured BNWs, while fast cooling at ,90 8C/min induced crystallization of the non-textured BNWs. We have also found that the alignment of the BNWs depended on the cooling rate. At a slow cooling rate the BNWs were heavily tangled while at a higher cooling rate they aligned well with the normal of the substrate. By manipulating the growth parameters, we have obtained two types of nanowire junctions. One was via fusing two nanowires together and the other, via joining them with another material. q 2003 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Electrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملInvestigation of the effect of Argon flow on the morphology of B4C nanoparticles synthesized by the VLS method
In this paper, new various morphologies of boron carbide were successfully synthesized using carbon black, activated carbon and boron oxide precursors as well as using cobalt nanoparticles as catalysts. Almost the whole morphology of synthesized boron carbide are consisted of smooth nanowires and nanobelts. With decreasing the carbon black particles size from 29 nm to 13 nm (29, 23, 17 and 13),...
متن کاملNanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer.
The metal-assisted chemical etching (MACE) was used to synthesis silicon nanowires. The effect of etchant concentration, etching and chemical plating time and doping density on silicon nanowires length were investigated. It is held that the increasing of HF and H2O2 concentrations lead to etching rate increment and formation of wire-like structure. The results show that, the appropriate ratio o...
متن کاملHeavily Boron-Doped Silicon Layer for the Fabrication of Nanoscale Thermoelectric Devices
Heavily boron-doped silicon layers and boron etch-stop techniques have been widely used in the fabrication of microelectromechanical systems (MEMS). This paper provides an introduction to the fabrication process of nanoscale silicon thermoelectric devices. Low-dimensional structures such as silicon nanowire (SiNW) have been considered as a promising alternative for thermoelectric applications i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Microelectronics Journal
دوره 34 شماره
صفحات -
تاریخ انتشار 2003