Drop-Weight Impact Test on U-Shape Concrete Specimens with Statistical and Regression Analyses
نویسندگان
چکیده
According to the principle and method of drop-weight impact test, the impact resistance of concrete was measured using self-designed U-shape specimens and a newly designed drop-weight impact test apparatus. A series of drop-weight impact tests were carried out with four different masses of drop hammers (0.875, 0.8, 0.675 and 0.5 kg). The test results show that the impact resistance results fail to follow a normal distribution. As expected, U-shaped specimens can predetermine the location of the cracks very well. It is also easy to record the cracks propagation during the test. The maximum of coefficient of variation in this study is 31.2%; it is lower than the values obtained from the American Concrete Institute (ACI) impact tests in the literature. By regression analysis, the linear relationship between the first-crack and ultimate failure impact resistance is good. It can suggested that a minimum number of specimens is required to reliably measure the properties of the material based on the observed levels of variation.
منابع مشابه
Experimental Investigation on Impact Resistance of Flyash Concrete and Flyash Fiber Reinforced Concrete
The present Experimental investigation is to study the Impact Resistance of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% by w...
متن کاملStudy on Impact Resistance of Pc Beams with Buffer Layer Made of Ductile Fiber Reinforced Cementitious Composites
In concrete structures such as road facilities, harbor facilities, sediment control dams, and others, impact loads sometimes act directly on members. Load bearing capacity, toughness and displacement recovery properties are important, and should be evaluated appropriately. Recently, to prevent the spalling of concrete portions is also one of the important requirements for concrete structures. T...
متن کاملEffects of Drying Temperature and Aggregate Shape on the Concrete Compressive Strength: Experiments and Data Mining Techniques
The main purpose of this paper is to assess the impact of the geometry and size of the aggregate, as well as the drying temperature on the compressive strength of the ordinary concrete. To this end, two aggregates with sharp and round corners were prepared in three different aggregate sizes. After preparing concrete samples, the drying operations were carried out in the vicinity of room tempera...
متن کاملInvestigating the Performance Characteristics of Asphaltic Concrete Containing Nano-Silica
Using nano-technology materials in the asphalt pavement industry is new compared with Portland cement concrete. The main objective of this study is to investigate the effects of nano-silica modification on some properties of a penetration grade asphalt cement and a typical asphalt concrete. 60/70 penetration grade bitumen was modified with different percentages of nano-silica (i.e. 1, 3 and 5%,...
متن کاملNonlinear Finite Element Modeling of Different Cross-Sectional Shapes of Slender RC Columns Confined with CFRP Wraps
In the present study, non-linear finite element analyses are carried out on the slender reinforced concrete columns wrapped using CFRP composite with different cross-sectional shapes having the same area. Thickness of the CFRP wraps, concrete compressive strength, corner radius, loading condition, slenderness ratio and column size are the main parameters of this study. According to this, four d...
متن کامل