Scanning electrochemical microscopy. 55. Fabrication and characterization of micropipet probes.
نویسندگان
چکیده
The fabrication and characterization of novel micropipet probes for use in scanning electrochemical microscopy (SECM) are described. These can be used to dispense small (pL) amounts of a solution while monitoring the electrochemical response at a substrate and at a ring electrode tip on the micropipet probe. The probes were constructed by insulating gold-coated borosilicate micropipets with electrophoretic paint and exposing a ring electrode at the tip by heat treatment. Characterization of the probes was performed using scanning electron microscopy, cyclic voltammetry, and SECM approach curve experiments. Routine construction of tips with diameters of the order of 3 microm was possible using this technique. The probes exhibited stable steady-state currents and positive and negative feedback approach curves that agreed with those predicted by theory. Demonstrative SECM imaging experiments were performed using a picodispenser to continuously dispense an electroactive solution (ferrocenemethanol) to the SECM cell while the probe was located within a few micrometers of a Pt substrate surface. Oxidation of the dispensed electroactive solution was performed at the substrate, and feedback currents were measured at the probe tip by holding the gold ring at a reducing potential. This mode of tip-dispensing SECM was used to obtain images of a platinum substrate electrode while monitoring both the substrate current and the feedback current at the probe.
منابع مشابه
FABRICATION AND CHARACTERIZATION OF POLYANILINE-GRAPHENE COMPOSITE AS ELECTRODE IN ELECTROCHEMICAL CAPACITOR
In this study, polyaniline-graphene composites with different nano-structures are synthesized and the behaviour of the obtained composites serving as electrode materials in electrochemical capacitors is studied. The morphology, crystal structure, and thermal stability of the composites are examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Thermal gravimetric analys...
متن کاملScanning electrochemical microscopy. 32. Gallium ultramicroelectrodes and their application in ion-selective probes.
Gallium ultramicroelectrodes for amperometric measurements in scanning electrochemical microscopy were fabricated by introduction of liquid Ga into drawn glass micropipets. Cyclic voltammetry of Ru(NH(3))(6)(3+) and the use of this species for SECM imaging is described. Double-barrel micropipet tips with a Ga amperometric electrode and an ion-selective (K(+)) potentiometric probe can also be co...
متن کاملElectrochemical fabrication of polypyrrole nanofibers and their characterization
Polypyrrole (PPy) nanofibers have been fabricated on glassy carbon electrode (GCE) usingelectrochemical technique. Electropolymerization of pyrrole (Py) for the fabrication of PPy nanofiberswas occurred on GCE by applying a fixed potential of about 0.85 V for 120 sec in a mild basic solutioncontaining sodium carbonate and sodium perchlorate. In the mild basic media, the monomer, Py, isoxidized ...
متن کاملFabrication and characterization of probes for combined scanning electrochemical/optical microscopy experiments.
A technique that combines scanning electrochemical microscopy (SECM) and optical microscopy (OM) was implemented with a new probe tip. The tip for scanning electrochemicaVoptical microscopy (SECM/OM) was constructed by insulating a typical gold-coated near-field scanning optical microscopy tip using electrophoretic anodic paint. Once fabricated, the tip was characterized by steady-state cyclic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Analytical chemistry
دوره 77 16 شماره
صفحات -
تاریخ انتشار 2005