Design of an Adaptive Hearing Aid Algorithm using Booth- Wallace Tree Multiplier
نویسندگان
چکیده
The paper presents FPGA implementation of a spectral sharpening process suitable for speech enhancement and noise reduction algorithms for digital hearing aids. Booth and Booth Wallace multiplier is used for implementing digital signal processing algorithms in hearing aids. VHDL simulation results confirm that Booth Wallace multiplier is hardware efficient and performs faster than Booth’s multiplier. Booth Wallace multiplier consumes 40% less power compared to Booth multiplier. A novel digital hearing aid using spectral sharpening filter employing booth Wallace multiplier is proposed. The results reveal that the hardware requirement for implementing hearing aid using Booth Wallace multiplier is less when compared with that of a booth multiplier. Furthermore it is also demonstrated that digital hearing aid using Booth Wallace multiplier consumes less power and performs better in terms of speed.
منابع مشابه
Design and Simulation of a 2GHz, 64×64 bit Arithmetic Logic Unit in 130nm CMOS Technology
The purpose of this paper is to design a 64×64 bit low power, low delay and high speed Arithmetic Logic Unit (ALU). Arithmetic Logic Unit performs arithmetic operation like addition, multiplication. Adders play important role in ALU. For designing adder, the combination of carry lookahead adder and carry select adder, also add-one circuit have been used to achieve high speed and low area. In mu...
متن کاملImplementation of Modified Booth Recoded Wallace Tree Multiplier for fast Arithmetic Circuits
Power consumption has become a critical concern in today’s VLSI system design. The growing market for fast floating-point co-processors, digital signal processing chips, and graphics processor has created a demand for high speed, area-efficient multipliers. The Modified Booth Recoding method is widely used to generate the partial products for implementation of large parallel multipliers, which ...
متن کاملReducing Hardware Complexity of Wallace Multiplier Using High Order Compressors Based on CNTFET
Multiplier is one of the important components in many systems such as digital filters, digital processors and data encryption. Improving the speed and area of multipliers have impact on the performance of larger arithmetic circuits that are part of them. Wallace algorithm is one of the most famous architectures that uses a tree of half adders and full adders to increase the speed and red...
متن کاملA High Speed Wallace Tree Multiplier Using Modified Booth Algorithm for Fast Arithmetic Circuits
Abstract: A Wallace tree multiplier using modified booth algorithm is proposed in this paper. It is an improved version of tree based Wallace tree multiplier [1] architecture. This paper aims at additional reduction of latency and power consumption of the Wallace tree multiplier. This is accomplished by the use of booth algorithm, 5:2, 4:2, and 3:2 compressor adders. An efficient VerilogHDL cod...
متن کاملVLSI Architecture of Pipelined Booth Wallace MAC Unit
This paper describes the pipelined architecture of high-speed modified Booth Wallace Multiply and Accumulator. The proposed multiply and accumulate circuits are based on the Booth algorithm and the pipelining techniques, which are most widely used to accelerate the multiplication speed. A 32-bit MAC Unit is designed in which the multiplication is done using the Modified Booth Wallace Multiplier...
متن کامل