Characterisation of Structure-Borne Sound Source Using Reception Plate Method
نویسندگان
چکیده
A laboratory-based experiment procedure of reception plate method for structure-borne sound source characterisation is reported in this paper. The method uses the assumption that the input power from the source installed on the plate is equal to the power dissipated by the plate. In this experiment, rectangular plates having high and low mobility relative to that of the source were used as the reception plates and a small electric fan motor was acting as the structure-borne source. The data representing the source characteristics, namely, the free velocity and the source mobility, were obtained and compared with those from direct measurement. Assumptions and constraints employing this method are discussed.
منابع مشابه
Frequency Band Averaged Data for Prediction of Structure-borne Sound Power from Mechanical Installations in Buildings
Structure-borne sound transmission is a more complicated process than airborne sound transmission, but practitioners seek methods of prediction for the former, which are as straightforward as for the latter. In this paper a description is given of measurement and calculation procedures where the source activity (the velocity of the source when resiliently supported) and the mobility, and receiv...
متن کاملAnalytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers
In the present study, the classical plate theory (CPT) was used to study sound radiation of forced vibrating thin circular plates coupled with piezoelectric layers using simply supported and clamped boundary conditions. The novelty of the study consists of an exact closed-form solution that was developed without any use of approximation. Piezoelectric, electrical potential loaded in the transve...
متن کاملCompact and Efficient Active Vibro-acoustic Control of a Smart Plate Structure
An effective wide band active control law through one kind of the Dynamic Vibration Absorber (DVA) is proposed and studied in this paper. With the help of mechanical impedance method, active DVA control law is formulated based on the passive mechanical model. The electrical DVA can generate multi-mode active damping to the structure. The host structure is an aluminum plate and acceleration sign...
متن کاملFree Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method
This study investigates natural frequency analysis of an FG composite rectangular plate partially contacting with a bounded fluid. The material properties are assumed to be varying continuously through the thickness direction according to a simple power law distribution in terms of volume fraction of material constituents. Wet dynamic transverse displacements of the plate are approximated by a ...
متن کاملIn-situ characterisation of structure borne noise from a building mounted wind turbine
Building mounted micro wind turbines (BMWTs) could potentially provide a useful contribution to renewable energy production but a means of predicting structure-borne sound and vibration is required. A particular difficulty is that BMWTs can only be operated when properly installed, therefore any source characterization measurements must be conducted in situ. Methods such as inverse force synthe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2013 شماره
صفحات -
تاریخ انتشار 2013