Experimental investigation of Material removal rate in CNC turning using Taguchi method
نویسندگان
چکیده
Machining of medium Brass alloy is very difficult. There are a number of parameters like cutting speed, feed and depth of cut etc. which must be given consideration during the machining of medium Brass alloy. This study investigates the effects of process parameters on Material Removal Rate (MRR) in turning of C34000. The single response optimization problems i.e. optimization of MRR is solved by using Taguchi method. The optimization of MRR is done using twenty seven experimental runs based on L’27 orthogonal array of the Taguchi method are performed to derive objective functions to be optimized within the experimental domain When the MRR is optimized alone the MRR comes out to be 8.91. The optimum levels of process parameters for simultaneous optimization of MRR have been identified. Optimal results were verified through confirmation experiments.
منابع مشابه
EXPERIMENTAL ANALYSIS OF CNC TURNING OF NYLON USING TAGUCHI METHOD
Manufacturing process frequently employs optimization of machining parameters in order to improve product quality as well as to enhance productivity. The material removal rate is a significant indicator of the productivity and cost efficiency of the process. Taguchi method has been implemented for assessing favorable (optimal) machining condition during the machining of nylon by considering thr...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملIntegration of grey-based Taguchi technique in optimization of parameters process during the turning operation of 16MnCr5 steel
CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...
متن کاملOptimization of CNC Turning Parameters on Aluminum 7015 Hybrid Metal Matrix Composite Using Taguchi Robust Design
-The Aluminum Hybrid Metal Matrix Composites (Al-HMMC) are finding numerous applications in many areas like Automobile, Piston and Cylinder and Aerospace, etc. Adding a third element into the metal matrix composite makes it hybrid. The Reinforcement of SiC and Graphite used in this Al-HMMC improves its strength. The present investigation is to find the optimum machining parameter of CNC turning...
متن کامل