Ferroelectric BaTiO3 thin films on Ni metal tapes using NiO as buffer layer

نویسندگان

  • Z. Yuan
  • C. L. Chen
  • J. C. Jiang
چکیده

Ferroelectric BaTiO3 BTO thin films were deposited on NiO buffered polycrystalline Ni tapes by pulsed laser deposition. Microstructural studies by x-ray diffractometer and transmission electron microscopy reveal that the as-grown BTO films have the nanopillar structures with an average size of approximately 80 nm in diameter and the good interface structures with no interdiffusion or reaction. The dielectric and ferroelectric property measurements exhibit that the BTO films have a relatively large dielectric constant, a small dielectric loss, and an extremely large piezoelectric response with a symmetric hysteresis loop. These excellent properties indicate that the as-fabricated BTO films are promising for the development of the structural health monitoring systems. © 2007 American Institute of Physics. DOI: 10.1063/1.2739082

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Research of surface-oxidation epitaxy of NiO films on cube textured Ni tapes

Thin films of NiO were fabricated in air by surface-oxidation epitaxy (SOE) on biaxially-textured Ni substrate, for use as buffer layers for YBCO coated conductors. The surface-oxidation conditions such as the temperature and the reaction time, as well as the cooling rate, playa determining role in the process of epitaxial growth of the NiO layer. A continuous, biaxially-aligned textured NiO la...

متن کامل

Single crystalline BaTiO3 thin films synthesized using ion implantation induced layer transfer

Layer transfer of BaTiO3 thin films onto silicon-based substrates has been investigated. Hydrogen and helium ions were co-implanted to facilitate ion-implantation-induced layer transfer of films from BaTiO3 single crystals. From thermodynamic equilibrium calculations, we suggest that the dominant species during cavity nucleation and growth are H2, H +, H2O, Ba 2+ and Ba–OH, and that the additio...

متن کامل

Preferentially oriented BaTiO3 thin films deposited on silicon with thin intermediate buffer layers

Barium titanate (BaTiO3) thin films are prepared by conventional 2-methoxy ethanol-based chemical solution deposition. We report highly c-axis-oriented BaTiO3 thin films grown on silicon substrates, coated with a lanthanum oxynitrate buffer layer of 8.9 nm. The influence of the intermediate buffer layer on the crystallization of BaTiO3 film is investigated. The annealing temperature and buffer ...

متن کامل

Tunable Schottky Barrier in Photovoltaic BiFeO3 Based Ferroelectric Composite Thin Films

We examine the photo-assisted polarization loop in a BiFeO3 thin film under UV light illumination. BiFeO3 thin film prepared by pulsed laser deposition method onto the BaTiO3 thin film and the polarization behavior has been measured under poling voltage. Our results show the engineered polarization due to controllable schottky barrier under inverse poling voltage. This control on schottky barri...

متن کامل

Fabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process

Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007