A High Precision Bandgap Reference Used in Power Management ICs
نویسندگان
چکیده
A 2.5V high precision BiCMOS bandgap reference with supply voltage range of 6V to 18V was proposed and realized. It could be applied to lots of Power Management ICs (Intergrated Circuits) due the high voltage. By introducing a preregulated current source, the PSRR (Power Supply Rejection Ratio) of 103dB at low frequency and the line regulation of 26.7μV/V was achieved under 15V supply voltage at ambient temperature of 27oC. Moreover, if the proper resistance trimming is implemented, the temperature coefficient could be reduced to less than 16.4ppm/oC. The start up time of the reference voltage could also be decreased with an additional bipolar and capacitor.
منابع مشابه
Design of a Cmos Bandgap Reference with Lowtemperature Coefficient and High Power Supply Rejection Performance
A high precision temperature compensated CMOS bandgap reference is presented. The proposed circuit employs current-mode architecture that improves the temperature stability of the output reference voltage as well as the power supply rejection when compared to the conventional voltage-mode bandgap referenc. Using only first order compensation the new architecture can generate an output reference...
متن کاملNoise Minimization for Low Power Bandgap Reference and Low Dropout Regulator Cores
This paper describes the techniques to design low power series low dropout regulators (LDO) with low output noise and high power supply rejection (PSR). The noise analysis of the bandgap reference is critical to the linear regulator’s output noise, since it represents the main source of noise. The necessary trade-offs that a designer faces are discussed according to the demands of modern IP cor...
متن کاملA High PSRR Voltage Reference for High Efficiency Power Management Circuit of MEMS Energy Harvesters
A high power supply rejection ratio (PSRR) bandgap voltage reference (BGR) which is used in the signal processing circuit of energy harvesters is presented in this paper. The PSRR of the BGR is improved by adding a pre-regulating circuit and a low pass filter. The pre-regulating circuit mainly improves the BGR PSRR at low frequency and the low pass filter mainly improves the BGR PSRR at high fr...
متن کاملA Low-Voltage High PSRR and High Precision CMOS Bandgap Reference
By adopting the technique of pre-regulator, a high PSRR and low temperature coefficient piecewise-linear bandgap reference (BGR) is designed for analog and mixed-signal application in this paper. The piecewise-linear BGR with pre-regulator, which is analyzed and simulated in SMIC 0.18μm CMOS process, has simple circuit architecture. Simulation results show that piecewise-linear BGR with pre-reg...
متن کاملA Sub-1V Power Supply Sub-bandgap with an Extended Voltage and Temperature Range
This paper presents 1μW curvature-corrected bandgap reference that is capable of operating with an input power supply range of 0.88-5.5V. A 0.3V precision voltage reference is implemented with 3-stage RNMC (Reversed Nested Miller Compensation) operational amplifier and a novel PTAT current source to compensate the thermal nonlinearity of the base-emitter voltage. An experimental prototype gener...
متن کامل