Analysis and optimization of a composite leaf spring
نویسندگان
چکیده
A four-leaf steel spring used in the rear suspension system of light vehicles is analyzed using ANSYS V5.4 software. The finite element results showing stresses and deflections verified the existing analytical and experimental solutions. Using the results of the steel leaf spring, a composite one made from fiberglass with epoxy resin is designed and optimized using ANSYS. Main consideration is given to the optimization of the spring geometry. The objective was to obtain a spring with minimum weight that is capable of carrying given static external forces without failure. The design constraints were stresses (Tsai–Wu failure criterion) and displacements. The results showed that an optimum spring width decreases hyperbolically and the thickness increases linearly from the spring eyes towards the axle seat. Compared to the steel spring, the optimized composite spring has stresses that are much lower, the natural frequency is higher and the spring weight without eye units is nearly 80% lower. 2003 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Design and Analysis of Composite Leaf Spring for Light Vehicles
Reducing weight while increasing or maintaining strength of products is getting to be highly important research issue in this modern world. Composite materials are one of the material families which are attracting researchers and being solutions of such issue. In this paper we describe design and analysis of composite leaf spring. The objective is to compare the stresses and weight saving of co...
متن کاملDevelopment of a Composite Leaf Spring for a Light Commercial Vehicle (Tata Magic)
Present time the main issue of automobile industry are weight reduction. The automobile industry has looking for any implementation or modification to reduce the weight of the vehicle. The suspension leaf spring is one of the potential items for weight reduction in automobile as it accounts for 10% to 20% of the unsprung weight. The introduction of composite leaf spring made of glass fiber rein...
متن کاملExperimental Investigation on Laminated Composite Leaf springs Subjected to Cyclic Loading
An automobile industry have an interest in replacement of conventional leaf spring with composite leaf spring to get better performance with less weight. This paper deals with by replacing the conventional leaf spring with composite leaf spring. The dimensions of an existing conventional steel leaf spring of a light commercial vehicle were taken to fabricate the special die which is further use...
متن کاملComparison Of Performance Of Glass Fibre Reinforced Plastic Leaf Spring With Steel Leaf Spring
Increasing competition and innovation in automobile sector tends to modify the existing products by new and advanced material products. A suspension system of vehicle is also an area where these innovations are carried out regularly.Leaf springs are one of the oldest suspension components that are being still used widely inautomobiles. Weight reduction is also given due importance by automobile...
متن کاملApplication of response surface methodology for optimization of purple coneflower plant (Echinacea purpurea)
Echinacea purpurea belongs to the family of Asteraceae which has different medicinal properties. The main goal of current research was optimization of callus induction and biomass production by using Response Surface Method (RSM). For this purpose, root and leaf explants were cultured in the ½ MS medium supplemented with different concentrations (0, 1 and 2 mg/L) of Kin either alone or with 2,4...
متن کامل