Single-walled carbon nanohorns coated with Fe2O3 as a superior anode material for lithium ion batteries.
نویسندگان
چکیده
A novel composite of Fe(2)O(3) and single-walled carbon nanohorns (SWCNHs) was firstly developed via a simple hydrothermal method. As an anode material for lithium ion batteries, a Fe(2)O(3)/SWCNHs composite shows excellent rate performance and cycle stability, even at a high current density of 1000 mA g(-1).
منابع مشابه
Carbon nanotube-wrapped Fe2O3 anode with improved performance for lithium-ion batteries
Metall oxides have been proven to be potential candidates for the anode material of lithium-ion batteries (LIBs) because they offer high theoretical capacities, and are environmentally friendly and widely available. However, the low electronic conductivity and severe irreversible lithium storage have hindered a practical application. Herein, we employed ethanolamine as precursor to prepare Fe2O...
متن کاملA high performance carrier for SnO2 nanoparticles used in lithium ion battery.
Ferrocene-encapsulated single-walled carbon nanotubes (Fc@SWNTs) are developed as carriers for attaching SnO(2). When Fc@SWNTs coated with SnO(2) nanoparticles were used as anode material in lithium ion batteries, the reversible capacity remained over 900 mA h g(-1) after 40 cycles, much higher than other carbon nanomaterials.
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملSustainable synthetic route for γ-Fe2O3/C hybrid as anode material for lithium-ion batteries.
A facile, high-yield and sustainable method is developed to synthesize iron oxide/C hybrids. Starch is chosen as the carbon source due to its superior gelatinization property and natural abundance, and ferric nitrate is used as the iron salt for the sustainable synthesis. The iron oxide in the final products exists in the γ-Fe2O3 phase. The γ-Fe2O3/C hybrids are used as anode materials for lith...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 47 26 شماره
صفحات -
تاریخ انتشار 2011