Hypersensitivity to conventional and to nickel-free orthodontic brackets.

نویسندگان

  • Mariele Cristina Garcia Pantuzo
  • Elton Gonçalves Zenóbio
  • Helenice de Andrade Marigo
  • Madelon Aparecida Fernandes Zenóbio
چکیده

The aim of this study was to evaluate the allergenic potential of orthodontic brackets, comparing the cutaneous sensitivity provoked by metals present in conventional metallic brackets to that provoked by brackets with a low concentration of nickel, known as "nickel-free". A sample was selected from 400 patients undergoing treatment in the orthodontic clinic of the Pontifical Catholic University of Minas Gerais (Belo Horizonte, MG, Brazil), in the period from the beginning of 2002 to the end of 2003. A cutaneous sensitivity patch test containing 5% nickel sulphate was used in 58 patients (30 males and 28 females), aged between 11 and 30, which were using fixed appliances with Morelli brackets in both arches. In a second phase, 30 days later, a comparative test of cutaneous sensitivity was applied to the whole sample with two types of test specimens, in the form of a disc. Two alloys were tested: discs composed of the alloy used in the construction of conventional brackets and discs composed of a nickel-free alloy. The internal part of the forearm was chosen for testing, and 20 test specimens of each experiment (corresponding to the twenty brackets of a complete fixed appliance) were applied. Of the 58 patients evaluated, 16 patients were sensitive to the patch test with 5% nickel sulphate. Out of these 16 patients, 12 developed an allergic reaction to experiment 1 (test specimen with nickel), while in experiment 2, only 5 patients showed sensitivity to that sample. The McNemar test revealed that the nickel-free test specimens provoked less allergic reaction when compared with the conventional alloy (p=0.016).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nickel and cobalt hypersensitivity reaction before and after orthodontic therapy in children.

Nickel and cobalt are major components of alloys used in orthodontics. The objectives of this cross-sectional study was to determine the prevalence of a nickel hypersensitivity reaction before and after orthodontic treatment with conventional stainless steel brackets and wires. The total sample consisted of 82 patients (55 females, and 27 males) from the Orthodontic Department at the Faculty of...

متن کامل

Evaluation of the Effect of an Experimental Herbal versus Fluoridated Mouthwash on Frictional Resistance and Surface Roughness between Orthodontic Brackets and Two Types of Archwire: In Vitro Study

Introduction: The present study aimed to evaluate an experimental herbal mouthwash, as compared to sodium fluoride mouthwash on the frictional resistance and surface roughness between brackets and two rectangular archwire types. Methods: A total of 60 premolar׳s brackets engaged with 0.019×0.025 archwires made of stainless steel and nickel-titanium alloys were used in this study. The samples we...

متن کامل

Metal Hypersensitivity in Orthodontic Patients

Orthodontic treatment of individuals with metal hypersensitivity is a matter of concern for the orthodontist. Orthodontic appliances contain metals like Nickel, Cobalt and Chromium etc. Metals may cause allergic reactions and are known as allergens. Reaction to these metals is due to biodegradation of metals in the oral cavity. This may lead to the formation of corrosion products and their expo...

متن کامل

Galvanic Corrosion among Different Combination of Orthodontic Archwires and Stainless Steel Brackets

Introduction: The aim of this study was to assess the galvanic behavior of different bracket and archwire combinations that are commonly used in orthodontic treatments. Methods: Three types of orthodontic archwires with a diameter of 0.016×0.022 inch and 80 standard edgewise maxillary central incisor brackets were selected. Three groups consisted of different wire-bracket couples and one group ...

متن کامل

Galvanic corrosion of metal injection molded (MIM) and conventional brackets with nickel-titanium and copper-nickel-titanium archwires.

OBJECTIVE To compare the galvanic coupling of conventional and metal injection molded (MIM) brackets with commonly used orthodontic archwires. MATERIALS AND METHODS Six of each type of bracket were suspended in lactic acid along with a sample of orthodontic wire (three nickel-titanium and three copper-nickel-titanium) for 28 days at 37 degrees C. The potential differences between the wires an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Brazilian oral research

دوره 21 4  شماره 

صفحات  -

تاریخ انتشار 2007