PEGylation of magnetic poly(glycidyl methacrylate) microparticles for microfluidic bioassays.

نویسندگان

  • Jana Kucerova
  • Zuzana Svobodova
  • Petr Knotek
  • Jiri Palarcik
  • Milan Vlcek
  • Miloslav Kincl
  • Daniel Horak
  • Julien Autebert
  • Jean-Louis Viovy
  • Zuzana Bilkova
چکیده

In this study, magnetic poly(glycidyl methacrylate) microparticles containing carboxyl groups (PGMA-COOH) were coated using highly hydrophilic polymer poly(ethylene glycol) (PEG). PEG was used to reduce nonspecific interactions with proteins and cells while decreasing adhesion of particles to the walls of a microfluidic devices from poly(dimethylsiloxane) (PDMS) and cyclic olefin copolymer (COC). Zeta potential measurement, infrared spectroscopy, scanning electron microscopy, anti-PEG ELISA assay, and bioaffinity interactions between biotin and streptavidin-HRP successfully proved the presence of PEG on the surface of microspheres. Both neat and PEGylated microspheres were then incubated with the inert protein bovine serum albumin or cells to evaluate the rate of nonspecific adsorption (NSA). PEG with Mr of 30,000 Da was responsible for 45% reduction in NSA of proteins and 74% for cells compared to neat particles. The microspheres' behavior in PDMS and COC microchannels was then evaluated. Aggregation and adhesion of PEGylated microspheres significantly decreased compared to neat particles. Finally, the model enzyme horseradish peroxidase was immobilized on the microspheres through the heterobifunctional PEG chain. The possibility for subsequent covalent coupling of the ligand of interest was confirmed. Such PEGylated microparticles can be efficiently used in PDMS microchips as a carrier for bioaffinity separation or of enzyme for catalysis.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Polymerization in Magnetic Field. XIX. Thermal Behavior of the Copoly- mers of Methyl Methacrylate with Glycidyl Methacrylate Synthesized in the Magnetic Field Presence

The paper evidences changes of thermal properties of poly(methyl methacrylate) as well as methyl methacrylate copolymers with glycidyl methacrylate (GMA) polymers synthesized classic and comparatively in a magnetic field. Samples of poly(methyl methacrylate) and methyl methacrylate copolymers with different amounts of GMA synthesized by radical emulsion polymerization with or without the presen...

متن کامل

Preparation of Novel Poly(hydroxyethyl methacrylate-coglycidyl methacrylate)-Grafted Core-Shell Magnetic Chitosan Microspheres and Immobilization of Lactase

Poly(hydroxyethyl methacrylate-co-glycidyl methacrylate)-grafted magnetic chitosan microspheres (HG-MCM) were prepared using reversed-phase suspension polymerization method. The HG-MCM presented a core-shell structure and regular spherical shape with poly(hydroxyethyl methacrylate-co-glycidyl methacrylate) grafted onto the chitosan layer coating the Fe3O4 cores. The average diameter of the magn...

متن کامل

Preparation of Anti-CD4 monoclonal antibody-conjugated Magnetic Poly (glycidyl methacrylate) Microspheres for CD4

Novel immunomagnetic microspheres have been prepared for separation of CD4 + lymphocytes. The magnetic nanoparticles with a diameter of approximately 78 nm were first synthesized by co-precipitation from ferrous and ferric iron solutions and subsequently entrapped within poly (glycidyl methacrylate) (PGMA) microspheres by a swelling and penetration process. Monoclonal antibody specific to CD4 m...

متن کامل

Activator Generated Electron Transfer Combined Atom Transfer Radical Polymerization (AGET-ATRP) for Controlled Grafting Location of Glycidyl Methacrylate on Regenerated Cellulose Ultrafiltration Membranes

This investigation indicates the ability to selectively graft glycidyl methacrylate (GMA) only from the external surface of regenerated cellulose (RC) ultrafiltration (UF) membranes using activator generated electron transfer (AGET) atom transfer radical polymerization (ATRP). This controlled polymerization resulted in epoxy functionalized polymer brush ends. Further reaction of the terminal ep...

متن کامل

Transferring vertically aligned carbon nanotubes onto a polymeric substrate using a hot embossing technique for microfluidic applications.

We explored the hot embossing method for transferring vertically aligned carbon nanotubes (CNTs) into microfluidic channels, fabricated on poly-methyl-methacrylate (PMMA). Patterned and unpatterned CNTs were synthesized by microwave plasma-enhanced chemical vapour deposition on silicon to work as a stamp. For hot embossing, 115 degrees C and 1 kN force for 2 min were found to be the most suitab...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Materials science & engineering. C, Materials for biological applications

دوره 40  شماره 

صفحات  -

تاریخ انتشار 2014