Mixing in Bubble Column and Airlift Reactors

نویسنده

  • A. SÁNCHEZ
چکیده

M ixing behavior of three geometrically equivalent 0.06 m bubble column and airlift photobioreactors was compared for use in microalgal culture. Mixing was characterized in terms of the axial dispersion coefficient, mixing time, circulation time and Bodenstein number. Measurements were reported in tap water and sea water, as used in growing microalgal biomass. Compared with the two airlift reactors (a split-cylinder and a draft-tube sparged device, both of aspect ratio 9.1), the bubble column (aspect ratio 1⁄4 9.1) had a shorter mixing time at any aeration rate (superficial aeration velocity of up to 0.05 m s in all reactors). Values of the various mixing parameters in the two fluids were quite comparable at identical aeration rates in any specific geometry of the reactors. Existing correlations of mixing times satisfactorily correlated the data in the bubble column, but not in the airlift reactors. The following correlations were established for the airlift devices:

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Growth characteristics of Chlorella sorokiniana in airlift and bubble column photobioreactors.

The present study investigated the feasibility of bioCO(2) sequestration using Chlorella sorokiniana. It was found that 5% CO(2) (v/v) in air was the most suitable concentration for the growth of this organism. At this concentration, the maximum rate of CO(2) sequestered and the biomass obtained were found to be 1.21 g L(-1)d(-1) and 4.4 g L(-1) respectively. Modeling and simulation of the grow...

متن کامل

Application of New Inflection Point Method for Hydrodynamics Study in Slurry Bubble Column Reactors

Bubble column reactors are used in a wide variety of applications such as multiphase bioreactors, catalytic slurry reactors, and absorption processes. The superficial gas velocity-gas holdup relationship and transition point are two important parameters for characterizing the hydrodynamics of a bubble column reactor. In this study, systematic investigation of a nitrogen - water - glass bead...

متن کامل

Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup

Gas holdup and bubble size are important parameters for simulation and designing in bubble column reactors. Because based on these parameters, the available gas-liquid interfacial area is defined for mass transfer. In this paper, the results of applying magnetic fields on the velocity field and volume fraction of gas holdup are reported. Hydrodynamics of the bubble column in the reactors is inv...

متن کامل

Gas holdup and mixing characteristics of a novel forced circulation loop reactor

Gas holdup and mixing time were characterized in a forced circulation internal loop draft-tube reactor (unaerated aspect ratio≈ 6, downcomero-riser cross-sectional area ratio = 0.493) as functions of the forced liquid superficial velocity in the riser (ULr) and the gas superficial velocity in he riser (UGr). Data were obtained in air–water system. The operation ranges were 0≤ULr ≤ 0.051 m/s and...

متن کامل

Gas-Liquid Interfacial Area, Bubble Size and Liquid-Phase Mass Transfer Coefficient in a Three-Phase External Loop Airlift Bubble Column

The interfacial area a was measured by the sulfite oxidation method in a three-phase external loop airlift bubble column suspending completely the different concentrations of ion exchange resin particles in aqueous carboxymethyl cellulose (CMC) solutions with a wide range of viscosity. The column had been previously studied for the circulating liquid velocity UL, gas holdup G and volumetric gas...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004