High‐Mobility p‐Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells
نویسندگان
چکیده
A high-mobility p-type organic semiconductor based on benzodithiophene and diketopyrrolopyrrole with linear alkylthio substituents (BDTS-2DPP) is used as a dual function interfacial layer to modify the interface of perovskite/2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene in planar perovskite solar cells. The BDTS-2DPP layer can remarkably passivate the surface defects of perovskite through the formation of Lewis adduct between the under-coordinated Pb atoms in perovskite and S atoms in BDTS-2DPP, and also shows efficient hole extraction and transfer properties. The devices with BDTS-2DPP interlayer show a peak power conversion efficiency of 18.2%, which is higher than that of reference devices without the BDTS-2DPP interlayer (16.9%). Moreover, the hydrophobic BDTS-2DPP interlayer effectively protects the perovskite against moisture, leading to enhanced device stability.
منابع مشابه
Investigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells
Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...
متن کاملPlanar perovskite solar cells using fullerene C70 as electron selective transport layer
Owing amongst other to its high electron mobility, fullerene C70, has been widely used as an electron transporting layer in organic solar cells. In this research, we report the use of C70 thin films as electron transport layers of planar perovskite solar cells (PSCs) using a conventional device structure. The thickness of the C70 layer has been optimized to achieve the best efficiency of 12%. I...
متن کاملHigh efficient Perovskite solar cells base on Niobium Doped TiO2 as a Buffer Layer
Here, the effect of lightly Niobium doped TiO2 layer on the performance of perovskite solar cells has been studied by using solar cell capacitance simulator (SCAPS). N addition, the effects of Niobium concentration, buffer film thickness and operating temperature on the performance of the perovskite solar cell are investigated. For doping level of 3.0 mol% into the TiO2 layer, cell efficiency o...
متن کاملSolution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells
Perovskite solar cells are emerging as one of the most promising candidates for solar energy harvesting. To date, most of the high-performance perovskite solar cells have exclusively employed organic hole-transporting materials (HTMs) such as 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) or polytriarylamine (PTAA) which are often expensive and have low hol...
متن کاملA comprehensive device modelling of perovskite solar cell with inorganic copper iodide as hole transport material
Hole transport material (HTM) plays an important role in the efficiency and stability of perovskite solar cells (PSCs). Spiro-MeOTAD, the commonly used HTM, is costly and can be easily degraded by heat and moisture, thus offering hindrance to commercialize PSCs. There is dire need to find an alternate inorganic and stable HTM to exploit PSCs with their maximum capability. In this paper, a compr...
متن کامل