10-fold detection range increase in quadrant-photodiode position sensing for photonic force microscope.

نویسندگان

  • Sandro Perrone
  • Giovanni Volpe
  • Dmitri Petrov
چکیده

We propose a technique that permits one to increase by one order of magnitude the detection range of position sensing for the photonic force microscope with quadrant photodetectors (QPDs). This technique takes advantage of the unavoidable cross-talk between output signals of the QPD and does not assume that the output signals are linear in the probe displacement. We demonstrate the increase in the detection range from 150 to 1400 nm for a trapped polystyrene sphere with radius of 300 nm as probe.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Measurement of probe displacement to the thermal resolution limit in photonic force microscopy using a miniature quadrant photodetector.

A photonic force microscope comprises of an optically trapped micro-probe and a position detection system to track the motion of the probe. Signal collection for motion detection is often carried out using the backscattered light off the probe-however, this mode has problems of low S/N due to the small backscattering cross sections of the micro-probes typically used. The position sensors often ...

متن کامل

Improved axial position detection in optical tweezers measurements.

We investigate the axial position detection of a trapped microsphere in an optical trap by using a quadrant photodiode. By replacing the photodiode with a CCD camera, we obtain detailed information on the light scattered by the microsphere. The correlation of the interference pattern with the axial position displays complex behavior with regions of positive and negative interference. By analyzi...

متن کامل

Gentle and fast atomic force microscopy with a piezoelectric scanning probe for nanorobotics applications.

A novel dual tip nanomanipulation atomic force microscope (AFM) platform operating in ambient conditions is presented. The system is equipped with a high frequency quartz piezoelectric self-sensing scanning probe for fast imaging and a passive cantilever for manipulation. The system is validated by imaging and selective pushing/pulling of gold colloid beads (diameters from 80 to 180 nm). This p...

متن کامل

Acoustic microscopy by atomic force microscopy

We have constructed an atomic force microscope enabling one to image the topography of a sample, and to monitor simultaneously ultrasonic surface vibrations in the MHz range. For detection of the distribution of the ultrasonic vibration amplitude, a part of the position-sensing light beam reflected from the cantilever is directed to an external knife-edge detector. Acoustic images taken on the ...

متن کامل

Brownian motion in a nonhomogeneous force field and photonic force microscope.

The photonic force microscope (PFM) is an opto-mechanical technique that uses an optically trapped probe to measure forces in the range of pico to femto Newton. For a correct use of the PFM, the force field has to be homogeneous on the scale of the Brownian motion of the trapped probe. This condition implicates that the force field must be conservative, excluding the possibility of a rotational...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Review of scientific instruments

دوره 79 10  شماره 

صفحات  -

تاریخ انتشار 2008