Review of Multifunctional Inverter Topologies and Control Schemes Used in Distributed Generation Systems
نویسندگان
چکیده
Recent developments in power electronics technology have spurred interest in the use of renewable energy sources as distributed generation (DG) generators. The key component in DG generators is a grid-connected inverter that serves as an effective interface between the renewable energy source and the utility grid. The multifunctional inverter (MFI) is special type of grid-connected inverter that has elicited much attention in recent years. MFIs not only generate power for DGs but also provide increased functionality through improved power quality and voltage and reactive power support; thus, the capability of the auxiliary service for the utility grid is improved. This paper presents a comprehensive review of the various MFI system configurations for single-phase (two-wire) and three-phase (threeor four-wire) systems and control strategies for the compensation of different power quality problems. The advances in practical applications and recent research on MFIs are presented through a review of nearly 200 papers.
منابع مشابه
A New Non-linear Control of the Four-Leg Inverter with Decoupled Model and Fast Dynamic Response for PV Generation Systems
Distributed generation (DG) will play an important role in future power generation systems, especially in stand-alone applications. Three phase four-leg inverter is a well-known topology which can be used as an interface power converter for DGs. Thanks to the fourth leg to provide the neutral path, the four-leg inverter is able to supply balanced loads as well as unbalanced loads. In this paper...
متن کاملOptimal Combined and Adaptive Protection of Active Distribution Networks Considering Different System Topologies Incorporating Optimal Selection of Standard Relay Curves
The change in the topology of active distribution networks (ADNs) is one of the essential challenges that might affect the protection schemes. The conventional protection schemes based on base topology result in some coordination constraint violations in other topologies due to the outage of upstream substations and distributed generation units. In this article, new combinational and adaptive p...
متن کاملDigital Control Techniques Based on Voltage Source Inverters in Renewable Energy Applications: A Review
In the modern era, distributed generation is considered as an alternative source for power generation. Especially, need of the time is to provide the three-phase loads with smooth sinusoidal voltages having fixed frequency and amplitude. A common solution is the integration of power electronics converters in the systems for connecting distributed generation systems to the stand-alone loads. Thu...
متن کاملControl of Inverter-Interfaced Distributed Generation Units for Voltage and Current Harmonics Compensation in Grid-Connected Microgrids
In this paper, a new approach is proposed for voltage and current harmonics compensation in grid-connected microgrids (MGs). If sensitive loads are connected to the point of common coupling (PCC), compensation is carried out in order to reduce PCC voltage harmonics. In absence of sensitive loads at PCC, current harmonics compensation scenario is selected in order to avoid excessive injection of...
متن کاملOptimum Structures of a Cascaded Multilevel Inverter for Minimum Number of Power Electronic Devices
In this paper, several optimum structures of a cascaded multilevel inverter is proposed. This optimization is based on generation a constant number of output voltage levels by using minimum number of power switches or dc voltage sources or minimum amount of blocked voltage by power switches. In addition, the optimum structure for a constant number of dc voltage sources by using minimum number o...
متن کامل