A PID Tuning Method for Tracking Control of an Underactuated Gantry Crane
نویسنده
چکیده
Abstract By the current research, a PID tuning procedure is developed to control of an overhead crane. To enable the crane to reach a desired position, a controller design strategy must be used. This work presents a simple and efficient enough approach to control of the overhead crane based on designing a PID controller. Ziegler-Nichols method is used to initiate gains setting for PID controller and a tuning procedure is developed to obtain better results. Tuning design of the PID controller is considered for tracking the response of trolley and minimum oscillation of pendulum. Finally, some simulations are performed to illustrate the capability of the presented method for control of the overhead crane.
منابع مشابه
Composite Nonlinear Feedback Control for an Underactuated Gantry System
This paper investigates the design of composite nonlinear feedback (CNF) control law for an underactuated gantry crane system to achieve positioning and anti-swing control. First, the dynamic model of a nonlinear underactuated gantry crane system is established by using the Euler-Lagrange modeling method. Then, the CNF control law is designed for the system to improve the anti-swing performance...
متن کاملExperimental Investigation on Active Sway Control of a Gantry Crane System using PID Controller
This project presents an experimental investigations into the development proportional integral derivative (PID) control schemes for active sway control of a gantry crane system. The main objective of controlling a gantry crane is to transport the load as fast as possible without causing any unnecessary swing at the final position. The proposed controller is used as a feedback control which is ...
متن کاملNonlinear Coupling Control Laws for an Underactuated Overhead Crane System
In this paper, we consider the regulation control problem for an underactuated overhead crane system. Motivated by recent passivitybased controllers for underactuated systems, we design several controllers that asymptotically regulate the planar gantry position and the payload angle. Specifically, utilizing LaSalle’s invariant set theorem, we first illustrate how a simple proportional–derivativ...
متن کاملFlatness Based Control of a Gantry Crane
This contribution deals with flatness based control of a laboratory model of a gantry crane. The mechanical model has 3DOFs, where a trolley can be moved on a rail, the load is fixed at the end of a rope and can be lifted or lowered by coiling or uncoiling this rope on a cylinder. Under the assumption that the rope is always stretched, the underactuated system is not input to state linearisable...
متن کاملAdaptive Tracking Control for an Overhead Crane System
This paper proposes an adaptive control method for an underactuated overhead crane system. To improve the transferring efficiency and enhance the security of the crane system, the trolley is required to reach the desired position as fast as possible, while the swing of payload needs to be within an acceptable domain. To achieve these objectives, a novel twostep design strategy consisting of a t...
متن کامل