Occupational dermatitis from soldering flux.
نویسندگان
چکیده
The aim of this study was to determine the specific agent responsible for eczema on the forearms of 2 electronic assemblers who cleaned out a flux-spraying unit once a week. Soldering flux can be a source of skin irritation as well as allergy. Patch test with dried flux residue (as is) and rosin in dilution series of 20%, 10%, and 1% in olive oil was performed. Readings were taken on day 2 and day 3. The rosin in dilution series was negative; however, the flux residue gave a + reaction on day 2, and by day 3 the reaction had weakened (+?). Similar results were obtained in 2 unexposed controls. Patch tests results in our cases indicate that the flux used in the soldering process caused irritant contact dermatitis.
منابع مشابه
Respiratory disease in workers exposed to colophony solder flux fumes: continuing health concerns.
The objectives of this study were to establish the prevalence of respiratory, eye, nose and throat symptoms of likely work-relation in workers exposed to colophony solder flux fumes and to assess their lung function. A cross-sectional study was conducted in four medium-sized electronics firms in which control measures to capture solder flux fume were absent or visibly ineffective. All female so...
متن کاملIdentification of a possible biomarker for colophony exposure.
Colophony is known to cause occupational asthma and dermatitis. Biological monitoring may be useful in assessing exposure. This paper describes a method for the analysis of dehydroabietic acid in urine and its potential use as a marker of colophony exposure. The method involves hydrolysis, solvent extraction, derivatization and analysis by gas chromatography-mass spectrometry. Twenty-eight work...
متن کاملOccupational asthma to gel flux containing dodecanedioic acid.
Most occupational asthma from electronic solder fluxes is due to colophony (1, 2). We report the first case of occupational asthma to electronic colophony-free gel flux predominantly containing dodecanedioic acid. The patient worked as an electronics instructor from 1999; he initially used solder wire and a separate flux (both colophony). In 2002, he changed to a colophony-free solder wire (pre...
متن کاملNo-Clean Reflow Process Implementation
ne of the corporate goals at AT&T is to eliminate chloroflurocarbons (CFCs) from its manufacturing operations by the end of 1994. Many alternatives have been implemented to meet this objective, including noclean wave soldering using low-solids flux, aqueous cleaning of water-soluble flux, aqueous cleaning with saponifiers and semiaqueous (terpene) cleaning. Part 1 of this article describes the ...
متن کاملOccupational asthma in an electronics factory.
Workers in a modern electronics factory were surveyed by questionnaire and lung function testing to see if there was evidence of widespread work-related respiratory symptoms. Of the responding workers exposed to solder flux fumes on the shop floor, 22% had work-related breathlessness or wheeze or both. Exposed workers had a lower FEV1 and FVC than unexposed workers. Work-related rhinitis was al...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Industrial health
دوره 42 3 شماره
صفحات -
تاریخ انتشار 2004