Analysis of Ti-6Al-4V implants placed with fibroblast growth factor 1 in rat tibiae.
نویسندگان
چکیده
Titanium-aluminum-vanadium (Ti-6Al-4V) implants were placed in the tibiae of 32 rats (male Sprague-Dawley, 350 g) to examine healing and bone response. Half of the implants were treated with fibroblast growth factor 1 (FGF-1) delivered in an activated fibrinogen matrix. Animals were injected with a radiopharmaceutical imaging agent, technetium-99m-methylene diphosphonate (Tc-99m-MDP), which concentrates in bone, especially in areas of higher osteoblastic activity. Binding of Tc-99m-MDP to the implant was detected in vivo by Anger gamma camera imaging. Fourteen days after implant surgery, specimens were recovered and prepared for histomorphometric analysis. Histologic examination revealed that samples treated with FGF-1 demonstrated significantly greater amounts of bone-to-implant contact (P < .05) compared to controls. Also, FGF-1-treated samples showed significantly greater amounts of bone (percent volume) adjacent to implants (P < .005). These findings were supported by analyses of the non-invasive Tc-99m-MDP images, which demonstrated significantly greater uptake of Tc-99m-MDP adjacent to FGF-1-treated implants (P < .05). Results of the experiments supported the hypothesis that FGF-1 could increase bone production around implants in a rat model.
منابع مشابه
Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
Nowadays modification of metallic biomaterials which are used as implants for bone and hard tissues replacement is considered as an important subject. In the current study, corrosion fatigue properties of Ti-6Al-4V alloy investigated via Rotating-Bending standard test method and then, the results compared with the fatigue properties of the specimens tested in the same conditions. Scanning elect...
متن کاملNovel sphene coatings on Ti-6Al-4V for orthopedic implants using sol-gel method.
Hydroxyapatite (HAp) is commonly used to coat titanium alloys (Ti-6Al-4V) for orthopedic implants. However, their poor adhesion strength and insufficient long-term stability limit their application. Novel sphene (CaTiSiO5) ceramics possess excellent chemical stability and cytocompatibility. The aim of this study is to use the novel sphene ceramics as coatings for Ti-6Al-4V. The sol-gel method w...
متن کاملOsseointegration of Titanium Ti-6Al-4V Alloy Implants in the Rat Femur: A Time-course SEM Study
Biological fixation of uncemented endosseous implants requires the apposition of bone onto implant’s surface in a process named osseointegration [1]. The present study examined bone tissue response to Ti-6Al-4V alloy implanted into the rat femurs over a long time range (3 days to 6 months). The progression of implants fixation in the cancellous bone of distal epiphysis and within the medullary ...
متن کاملMechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE)
Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...
متن کاملOsteoblastic behavior to zirconium coating on Ti-6Al-4V alloy
PURPOSE The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The International journal of oral & maxillofacial implants
دوره 16 4 شماره
صفحات -
تاریخ انتشار 2001