Magnetic and Mechanical Properties of Deformed Iron Nitride γ'-Fe4N
نویسندگان
چکیده
1Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 70101, Taiwan 2Department of Mechanical Engineering, National Cheng Kung University, Tainan 70101, Taiwan 3Department of Aircraft Engineering, Air Force Institute of Technology, Kaohsiung 82047, Taiwan 4Laboratory of Polymeric Composite Materials, ISPMS SB RAS, Tomsk 634021, Russia 5Laboratory of Physics of Surface Phenomena, ISPMS SB RAS, Tomsk 634021, Russia
منابع مشابه
Laser pyrolysis fabrication of ferromagnetic gamma'-Fe4N and FeC nanoparticles.
Using the laser pyrolysis method, single phase gamma'-Fe4N nanoparticles were prepared by a two step method involving preparation of nanoscale iron oxide and a subsequent gas-solid nitridation reaction. Single phase Fe3C and Fe7C3 could be prepared by laser pyrolysis from Fe(CO)5 and 3C2H4 directly. Characterization techniques such as XRD, TEM and vibrating sample magnetometer were used to meas...
متن کاملMössbauer and Magnetic Investigation of Iron Nitride with Martensite Structure Synthesised from Oxy-hydroxide Type Precursor
Fe16N2 fine particles were prepared by reduction in 5% H2/Ar gas mixture flow, starting from goethite or hematite precursors, followed by nitridation in ammonia gas flow. Small amounts of metallic iron and iron oxide are present besides the main phase which is an ordered iron nitride having martensite structure (α ’’ -Fe16N2) as revealed by Mössbauer spectroscopy measurements. However, X-ray di...
متن کاملMagnetic moment of iron in metallic environments
Rare-earth iron nitrides are emerging as an important class of magnetic materials. In certain rare-earth iron compounds, the insertion of small atoms such as nitrogen and boron has resulted in significant changes in the magnetic properties in the form of higher Curie temperatures, enhanced magnetic moments, and stronger anisotropies. In an attempt to understand some of the above, we have focuse...
متن کاملInfluence of low-temperature nitriding on the strain-induced martensite and laser-quenched austenite in a magnetic encoder made from 304L stainless steel
We have investigated the possibility of producing a magnetic encoder by an innovative process. Instead of turning grooves in the encoder bar for precise positioning, we incorporated the information in 304L stainless steel by transforming the austenite to martensite after bar extrusion in liquid nitrogen and marking it with a laser, which caused a local transformation of martensite back into aus...
متن کاملINVESTIGATION NITRIDE LAYERS AND PROPERTIES SURFACES ON PULSED PLASMA NITRIDED HOT WORKING STEEL AISI H13
Nitriding is a surface treatment technique used to introduce nitrogen into metallic materials to improve their surface hardness, mechanical properties, wear resistance and corrosion resistance. In this research, the effects of plasma nitriding parameters including frequency and duty cycle were investigated on samples with different grooves dimensions. Steel blocks prepared from DIN1.2344 hot wo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- J. Applied Mathematics
دوره 2015 شماره
صفحات -
تاریخ انتشار 2015